AudioQuest NRG-Y2 strömkabel användarmanual

1. Produkt överview

The AudioQuest NRG-Y2 Power Cable is designed to deliver clean and stable power to various electronic devices, enhancing their performance. It features a 1-meter length with a C7 connector for the device end and a 3-prong wall plug for the power source. This cable incorporates advanced technologies to minimize noise and distortion, ensuring optimal signal transfer.

• Long Grain Copper: Minimizes distortion caused by grain boundaries within the conductor.
• Semi-Solid Concentric Conductors: Strands are tightly packed and maintain position, reducing strand-interaction distortion.
• Silver-Plated Drain Wires: Direction-controlled shield conductors efficiently drain RF noise to ground.
• Noise-Dissipation Technology: Reduces interference for quieter backgrounds.

Image 1.1: The AudioQuest NRG-Y2 Power Cable, showcasing its robust design and connectors.

2. Installationsanvisningar

Follow these steps to properly connect your AudioQuest NRG-Y2 Power Cable:

1. Identifiera kopplingar: Locate the C7 connector (two-pin, figure-8 shape) and the 3-prong wall plug.
2. Anslut till enhet: Insert the C7 connector firmly into the corresponding power inlet on your electronic device (e.g., DAC, powered speaker, game console, streamer). Ensure it is fully seated.
3. Anslut till eluttaget: Insert the 3-prong wall plug into a standard, grounded AC power outlet. Ensure the connection is secure.
4. Verifiera anslutningen: Confirm both ends of the cable are securely connected before powering on your device.

Bild 2.1: Detaljerad view of the C7 and 3-prong connectors for proper identification during setup.

3. Bruksanvisning

The AudioQuest NRG-Y2 Power Cable operates passively by supplying power to your connected device. No specific operational steps are required for the cable itself beyond ensuring a secure and stable connection.

• Ensure the cable is not bent or kinked sharply, which could damage the internal conductors.
• Avoid placing heavy objects on the cable.
• Confirm that the power outlet is functioning correctly and provides the appropriate voltage för din enhet.

4. Underhåll

Proper maintenance ensures the longevity and optimal performance of your power cable:

• Rengöring: Använd en mjuk, torr trasa för att försiktigt torka av kabeln och kontakterna. Använd inte flytande rengöringsmedel eller slipande material.
• Lagring: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspektion: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent pins on the connectors. If damage is observed, discontinue use and replace the cable.

5. Felsökning

Om du stöter på problem kan du överväga följande felsökningssteg:

• Ingen ström till enheten:
  • Ensure both the C7 connector and the 3-prong wall plug are fully and securely inserted.
  • Test the power outlet with another device to confirm it is active.
  • Kontrollera om det finns utlösta strömbrytare.
• Intermittent effekt:
  • Re-seat both connectors to ensure a firm connection.
  • Inspect the cable for any visible damage. A damaged cable may require replacement.

If problems persist after performing these steps, contact AudioQuest customer support for further assistance.

6. Specifikationer

7. Garantiinformation

The AudioQuest NRG-Y2 Power Cable is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official AudioQuest webwebbplatsen eller kontakta deras kundtjänst direkt. Spara ditt inköpsbevis för garantivalidering.

8. Support

For additional assistance, technical support, or inquiries not covered in this manual, please visit the official AudioQuest website or contact their customer support team. You can typically find contact information and FAQs on their support pages.

AudioQuest Official Webplats: www.audioquest.com