Introduktion
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Bild: Fram view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Nyckelfunktioner
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Brett temperaturområde: 32 till 572°F (0 till 300°C).
- Programmerbara larm: Set desired temperatures for food and oven; an alarm sounds when reached.
- Timer funktion: Includes a 10-hour count up/down timer.
- Hållbar konstruktion: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Mångsidig montering: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Val av enhet: Växla enkelt mellan Fahrenheit och Celsius.
- Driva: Operates on 1 AAA battery (included).
Inställning
- Batteriinstallation:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Sondanslutning:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- Placering:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Bild: Baksida view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Bruksanvisning
Temperaturmätning
- Sätt in sond: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Ström på: Tryck på PÅ/AV button to activate the thermometer.
- Välj enhet: Tryck på °F/°C button to toggle between Fahrenheit and Celsius display.
- Set Food Temperature Alarm:
- Tryck på LÄGE button until "FOOD" is selected.
- Tryck på KÖTT button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press UPPSÄTTNING to manually adjust the target temperature using the HR och MIN knappar.
- Trycka ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Tryck på LÄGE button until "OVEN" is selected.
- Trycka UPPSÄTTNING to manually adjust the target oven temperature using the HR och MIN knappar.
- Trycka ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Timer funktion
- Välj timerläge: Tryck på LÄGE button until "TIMER" is selected.
- Ställ in tid: Använd HR och MIN buttons to set the desired countdown time (up to 10 hours).
- Start/Stopp: Tryck på START/STOPP knappen för att starta eller pausa nedräkningen.
- Återställa: To clear the timer, press and hold the START/STOPP knapp.
Underhåll
- Rengöring av sonden: After each use, wipe the stainless steel probe with a damp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Rengöring av enheten: Wipe the thermometer unit with a soft, damp trasa. Använd inte slipande rengöringsmedel och doppa inte enheten i vatten.
- Lagring: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Batteribyte: Replace the AAA battery when the display becomes dim or unresponsive.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Ingen eller svag skärm | Lågt eller urladdat batteri; felaktig batteriinstallation. | Byt ut AAA-batteriet och se till att polerna är rättvända. |
| Felaktiga temperaturavläsningar | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Larmet ljuder inte | Alarm function not activated; volume too low. | Tryck på ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Specifikationer
- Modell: DSP1
- Temperaturområde: 32 till 572°F (0 till 300°C)
- Sondlängd: 6.75 tum (17 cm)
- Kabellängd: 39 tum (1 m)
- Strömkälla: 1 x AAA-batteri (ingår)
- Visningstyp: Digital LCD
- Material: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- Drag: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Mått (enhet): Approximately 7.5 inches (H) x 3 inches (W) x 0.625 inches (D)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Garantiinformation
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN webwebbplats. Spara ditt inköpskvitto som inköpsbevis för eventuella garantianspråk.
Stöd
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN webplats.
Tillverkare: CDN
Webplats: www.cdn-timeandtemp.com
Telefon: 800-338-5594