Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Introduktion

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Allmänna säkerhetsinstruktioner

Följ alltid följande säkerhetsåtgärder när du använder elverktyg:

• Säkerhet på arbetsområdet: Håll arbetsområdet rent och väl upplyst. Röriga eller mörka områden inbjuder till olyckor. Använd inte elverktyg i explosiva atmosfärer, till exempel i närvaro av brandfarliga vätskor, gaser eller damm.
• Elsäkerhet: Elverktygskontakter måste passa i uttaget. Modifiera aldrig kontakten på något sätt. Undvik kroppskontakt med jordade ytor såsom rör, element, spisar och kylskåp.
• Personlig säkerhet: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Verktygsanvändning och vård: Tvinga inte elverktyget. Använd rätt elverktyg för din tillämpning. Dra ur kontakten från strömkällan innan du gör några justeringar, byter tillbehör eller förvarar elverktyg.
• Service: Låt en kvalificerad reparatör serva ditt elverktyg med endast identiska reservdelar. Detta säkerställer att elverktygets säkerhet upprätthålls.

3. Produktkomponenter

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• SDS Plus Chuck
• Hjälphandtag
• Djupstopp
• Lägesväljare (borrmaskin, slagborrmaskin, mejsel)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Lock-on Button (for continuous operation)

Figur 1: Överview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Bild 3: Närbild view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Inställning

4.1 Fästa hjälphandtaget

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Montera djupanslaget

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Sätta i SDS Plus-borrar/mejslar

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Bruksanvisning

5.1 Lägesval

The mode selector switch allows you to choose the appropriate operating mode:

• Borrning (endast rotation): For drilling in wood, metal, or plastics.
• Slagborrning (rotation med slag): For drilling in concrete and masonry.
• Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Slå på/av och hastighetsreglering

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Rotationsriktning

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Underhåll

Regelbundet underhåll säkerställer din borrhammares livslängd och optimala prestanda.

• Rengöring: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp trasa. Använd inte starka rengöringsmedel eller lösningsmedel.
• Chuckunderhåll: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Inspektion av sladd: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Lagring: Förvara verktyget i originalfodralet på en torr, säker plats, utom räckhåll för barn.

7. Felsökning

8. Tekniska specifikationer

9. Garantiinformation

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webplats.

10. Support

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official webwebbplatsen för ytterligare hjälp och resurser.

Officiell Webplats: www.einhell.com