WFLY X9 RC bilradio bruksanvisning

1. Introduktion

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. Produkt överview

2.1 Nyckelfunktioner

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 Vad finns i lådan

• WFLY X9 Transmitter
• RG206S Receiver

2.3 Produktkomponenter

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

Figur 2: En detaljerad view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltage, extern voltage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. Inställning

3.1 Installation av sändarbatteri

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. Öppna batterifackets lock.
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. Stäng batterifacket ordentligt.

Note: The transmitter supports a working voltage intervall från 3.5V till 6.0V.

3.2 Mottagarenslutning

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltage intervall från 3.5V till 9.0V.

3.3 Bindande förfarande

För att upprätta kommunikation mellan sändare och mottagare krävs en bindningsprocess:

1. Stäng av både sändaren och mottagaren.
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Starta bindningsprocessen från sändaren.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. Drift

4.1 Grundläggande kontroller

• Ratt: Controls the left/right direction of your RC vehicle.
• Gasutlösare: Dra för att accelerera framåt, tryck för att bromsa eller backa.
• trim: Adjust the neutral position of steering and throttle channels for fine-tuning.
• D/R (dubbel hastighet): Adjusts the maximum throw of steering or other channels.

4.2 Pekskärmsnavigering

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• Huvudskärm: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• Menyknapp: Öppnar huvudinställningsmenyn.
• Användarmeny: Anpassningsbara genvägar för ofta använda funktioner.
• Modellval: Select from up to 40 stored models, each with its own unique settings.

4.3 Avancerade funktioner

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• Röstsändning: Enable voice prompts for telemetry data or system alerts.
• GPS-stöd: When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Kanalgräns: Protect your servos and mechanical components by setting maximum travel limits for each channel.

5. Underhåll

5.1 Laddning av sändaren

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 Rengöring och förvaring

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Ta ut batterierna ur sändaren om den ska förvaras under längre perioder för att förhindra läckage.

5.3 Uppgradering av fast programvara

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6. Felsökning

6.1 Vanliga frågor

7. Specifikationer

7.1 Transmitter (WFLY X9)

• Working Voltage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• Arbetsström: 260~400mA
• Frekvenshoppning: FHSS
• Modulation: LORA
• Ansökan: RC cars, boats, tanks, robots, etc.
• Upplösning: 4096
• Frekvensband: 2.4 GHz (tvåvägs)
• Överföringseffekt: ≤100mw
• Räckvidd: >600m (ideal conditions)
• Driftstemperatur: -10℃ till +60℃
• Simulator Interface: 3.5mm (PPM)
• Lagring: 40 modellers minne
• Program Mix: 5 års modeller
• Röstsändning: Stöd
• Laddning: Support 1S LiPo battery (Type C)
• Språk: engelska
• Uppgradering: USB online upgrade
• Servo: Stöd
• Visa: 3.5” 480*320 capacitive touch screen
• Mått: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• Vikt: 318g

7.2 Receiver (RG206S)

• Modellnamn: RG206S
• Kanaler: 6 channels (PWM)
• Arbetsström: 95mA
• Frekvensband: 2.4GHz (two-way transmission)
• Working Voltage: 3.5V~9.0V
• Modulation: LORA
• GPS: Support speed detection
• Ansökan: RC cars, boats, tanks, robots, etc.
• Upplösning: Full channel 4096
• Driftstemperatur: -10℃ till +60℃
• Extern voltage Detektion: DC 1~36V
• PPM: Support 180/270°
• W.BUS: Support S.BUS
• Uppgradering: USB online upgrade
• Mått: 33.6 x 22.3 x 12.3 mm
• Vikt: 7.6g

7.3 Fysiska dimensioner

• Product Dimensions (Transmitter): 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• Artikelvikt (totalt): 1.54 pund

8. Garanti och support

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's webwebbplats för garantiinformation.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.