Wheelock WHST-H15

Wheelock WHST-H15 Paging Horn Instruction Manual

Model: WHST-H15

1. Introduktion

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. Säkerhetsinformation

VARNING:

  • Installation and wiring must be performed by qualified personnel in accordance with all local and national electrical codes.
  • Disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure the mounting surface can adequately support the weight of the paging horn.
  • Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
  • Använd endast angiven volymtage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. Paketets innehåll

Kontrollera att alla komponenter finns och är oskadade vid uppackning:

  • Wheelock WHST-H15 Paging Horn (1 unit)
  • Adjustable Mounting Bracket (pre-attached or separate)
  • Installation Hardware (screws, washers, nuts - quantity may vary)
  • Denna bruksanvisning

4. Installation och installation

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Wheelock WHST-H15 Paging Horn with adjustable mounting bracket

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

  1. Välj plats: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
  2. Säkert fäste: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
  3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 Anslutningar

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

  1. Effektval: Leta reda på voltage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltagDetta val kan skada enheten.
  2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
  3. Säkra anslutningar: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. Bruksanvisning

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

  1. Ström på: Apply power to your audio amplifier or paging system.
  2. Testljud: Initiate a test page or audio signal through your system.
  3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. Underhåll

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

  • Regelbunden inspektion: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
  • Rengöring: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
  • Miljöskydd: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. Felsökning

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

ProblemMöjlig orsakLösning
Ingen ljudutgång
  • Ingen kraft till amplivligare
  • Felaktig kabeldragning
  • Felaktig voltage urval
  • Skadat horn
  • Kontrollera ampelförsörjning
  • Verify all wiring connections and polarity
  • Se till voltage selector matches system voltage
  • Contact Wheelock support if horn is damaged
Förvrängt eller lågt ljud
  • Felaktig voltage urval
  • Amplifier output too low/high
  • Lösa anslutningar
  • Verifiera voltage selector setting
  • Justera amplifier volym
  • Kontrollera och säkra alla ledningsanslutningar
Horn not securely mounted
  • Lösa monteringsdetaljer
  • Felaktig installation
  • Tighten all screws and bolts on the mounting bracket
  • Re-evaluate mounting location and method

8. Specifikationer

StämplaWheelock
ModellWHST-H15
Effektvärde15 Watt
Voltage Kompatibilitet25V, 70V, 100V (selectable)
MonteringJusterbar monteringsfäste
MiljöVäderbeständig
FärgBeige
Produktmått (LxBxH)11 x 11 x 11 tum
Objektets vikt0.01 uns
Datum först tillgängligt21 november 2013

9. Garanti och support

For warranty information and technical support, please refer to the official Wheelock webwebbplatsen eller kontakta deras kundtjänst direkt. Spara ditt inköpskvitto som köpbevis.

Wheelock Customer Support: Visit Eaton's Wheelock Webplats

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.