Electron Microscopy Sciences 5800-DTH
Branson Ultra Sonic Bath Model 5800-DTH User Manual
Model: 5800-DTH | Brand: Electron Microscopy Sciences
Introduktion
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of the Branson Ultra Sonic Bath Model 5800-DTH. Please read this manual thoroughly before operating the unit to ensure proper usage and to prevent damage or injury.
The Branson Ultra Sonic Bath Model 5800-DTH is an ultrasonic cleaner designed for laboratory and industrial applications. It features a digital timer, heater, degas function, and temperature monitoring capabilities. Its tank dimensions are 11.5 inches by 9.5 inches by 6 inches, with a capacity of 2.5 gallons (9.5 liters). The overall size of the unit is 15.6 inches by 15.8 inches by 14.9 inches.

Image: The Branson Ultra Sonic Bath Model 5800-DTH, a compact ultrasonic cleaner with a digital display and control panel on top, and a stainless steel tank.
Säkerhetsföreskrifter
- Se alltid till att enheten är korrekt jordad.
- Använd inte enheten utan vätska i tanken.
- Use only approved cleaning solutions. Avoid flammable or corrosive liquids.
- Keep hands and foreign objects out of the tank during operation.
- Koppla ur strömmen innan du utför något underhåll eller rengöring.
- Säkerställ tillräcklig ventilation under drift.
- Sänk inte ner enheten i vatten eller andra vätskor.
Inställning
- Uppackning: Carefully remove the ultrasonic bath from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
- Placering: Place the unit on a stable, level, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation.
- Strömanslutning: Connect the power cord to a grounded electrical outlet (110 V).
- Fylla tanken: Fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the minimum and maximum fill lines. Do not overfill.
- Degassing (Initial Use): For optimal performance, especially with fresh solutions, perform a degassing cycle. This removes dissolved gases from the liquid, which can interfere with ultrasonic cleaning efficiency.
Bruksanvisning
Grundläggande drift
- Ström på: Press the power button to turn on the unit. The digital display will illuminate.
- Ställ in temperatur (om tillämpligt): Use the temperature controls to set the desired cleaning solution temperature. Allow time for the heater to reach the set point.
- Ställ in timer: Use the timer controls to set the desired cleaning duration. Typical cycles range from 5 to 30 minutes depending on the application.
- Placera föremål: Carefully place the items to be cleaned into the cleaning basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom or sides of the tank.
- Börja städa: Press the start button to initiate the ultrasonic cleaning cycle. The unit will operate for the set duration and then automatically shut off.
- Ta bort objekt: Once the cycle is complete, carefully remove the basket and rinse the cleaned items thoroughly with water.
Degas Function
The degas function rapidly removes dissolved gases from the cleaning solution, improving ultrasonic efficiency. Activate this function for approximately 5-10 minutes when using fresh solution or if cleaning performance seems reduced.
Temperaturkontroll
The integrated heater allows for precise temperature control of the cleaning solution. Optimal cleaning temperatures vary by application and cleaning solution type. Refer to your cleaning solution's instructions for recommended temperatures.
Underhåll
- Tömma tanken: Regularly drain and replace the cleaning solution. Use the drain valve located on the unit to empty the tank.
- Rengöring av tanken: After draining, wipe the inside of the tank with a soft cloth to remove any residue. Do not use abrasive cleaners or scouring pads.
- Utvändig rengöring: Rengör enhetens utsida med adamp trasa. Undvik att vatten kommer in i kontrollpanelen eller de elektriska komponenterna.
- Filterunderhåll (om tillämpligt): Check and clean any integrated filters as per the schedule outlined in the full product manual (if applicable).
- Lagring: När den inte används under längre perioder, se till att enheten är ren, torr och förvaras på en sval och torr plats.
Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Enheten slås inte på. | Ingen strömförsörjning; felaktig nätsladd; intern säkring har gått. | Check power connection and outlet; inspect power cord; contact service for fuse replacement. |
| Ingen ultraljudsaktivitet. | Insufficient liquid; air bubbles in solution (no degas); transducer issue. | Add more liquid; perform degas cycle; contact service. |
| Dåliga rengöringsresultat. | Incorrect solution; insufficient temperature; overloaded tank; items not submerged. | Use appropriate solution; adjust temperature; reduce load; ensure full submersion. |
| Värmaren fungerar inte. | Heater element failure; temperature sensor issue. | Contact service for repair. |
Specifikationer
- Modell: Branson Ultra Sonic Bath Model 5800-DTH
- Stämpla: Elektronmikroskopivetenskap
- Strömförsörjning: 110 V
- Tank Dimensions (L x W x D): 11.5 x 9.5 x 6 cm
- Tankkapacitet: 2.5 gallons (9.5 liter)
- Övergripande mått (L x B x H): 15.6 x 15.8 x 14.9 cm
- Drag: Digital Timer, Heater, Degas Function, Temperature Monitor
- Tillverkare: EMS
- ASIN: B010NWGVJS
Garantiinformation
This Branson Ultra Sonic Bath Model 5500-DTH is covered by a standard manufacturer's warranty. For specific terms, duration, and conditions, please refer to the warranty card included with your product or contact Electron Microscopy Sciences directly. Keep your proof of purchase for warranty claims.
Kundsupport
For technical assistance, spare parts, or service inquiries, please contact Electron Microscopy Sciences customer support. When contacting support, please have your model number (5800-DTH) and serial number (if applicable) ready.
Elektronmikroskopivetenskap
Visit the Electron Microscopy Sciences Store on Amazon
(Se tjänstemannen website or product documentation for direct contact information such as phone numbers or email addresses, as these are not provided in the current data.)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.