Intermec PB51B33004100
Intermec PB51 Mobil Kvittoskrivare Bruksanvisning
Model: PB51B33004100
Introduktion
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.

Bild 1: Framsidan view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Inställning
1. Uppackning och inspektion
- Ta försiktigt ut skrivaren och alla tillbehör ur förpackningen.
- Kontrollera att alla komponenter som anges på följesedeln finns med.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Batteriinstallation och laddning
- Se till att skrivaren är avstängd.
- Locate the battery compartment on the printer.
- Insert the battery, ensuring proper alignment with the contacts.
- Stäng batterifacket ordentligt.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Fylla på termopapper
- Öppna luckan till pappersfacket.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Leta efter available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Serie: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Bruksanvisning
1. Slå på / av
- För att slå på, tryck och håll in strömknappen tills displayen tänds.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Använda LCD-skärmen
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Underhåll
1. Rengöring av skrivhuvudet
- Power off the printer and disconnect it from any power source.
- Öppna pappersfacket.
- Torka försiktigt av skrivhuvudets yta med en luddfri trasaampavslutas med isopropylalkohol.
- Låt skrivhuvudet torka helt innan du stänger locket och slår på skrivaren.
- Perform this cleaning regularly, especially if print quality degrades.
2. Batterivård
- För att maximera batteriets livslängd, undvik att ladda ur batteriet helt ofta.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Allmän rengöring
Torka av skrivarens utsida med en mjuk, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Skrivaren slås inte på | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Ingen utskrift | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Dålig utskriftskvalitet | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Anslutningsproblem | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Specifikationer
| Särdrag | Detalj |
|---|---|
| Modellnamn | PB51B33004100 |
| Utskriftsteknik | Direkt termisk |
| Skrivarutdata | Svartvit |
| Maximal mediestorlek | 4 tum |
| Anslutningsteknik | USB, Serial, Bluetooth |
| Objektets vikt | 42 Ounces (approx. 2.63 lbs) |
| Paketets mått | 10.2 x 10 x 5 tum |
| Controllertyp | Android (kompatibel) |
| Tillverkare | Intermec |
Garanti och support
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) webwebbplatsen för detaljerade garantivillkor.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.