Philips Lighting 5058131PN

Philips myLiving PONGEE LED-spotlight (modell 5058131PN) Bruksanvisning

1. Introduktion

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Säkerhetsinformation

Följ alltid följande säkerhetsåtgärder för att förhindra skada eller skador:

  • Elsäkerhet: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • Endast för inomhusbruk: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
  • Typ av lampa: Använd endast GU10 LED-lampor enligt anvisningarna. Överskrid inte den maximala wattstyrkan.tage anges på armaturen.
  • Hantering: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
  • Rengöring: Rengör armaturen med en mjuk, torr trasa. Använd inte slipande rengöringsmedel eller lösningsmedel.

3. Paketets innehåll

Kontrollera att alla komponenter finns innan installationen påbörjas:

  • Philips myLiving PONGEE LED Spot Light fixture (1 unit)
  • Monteringsdetaljer (skruvar, väggpluggar)
  • Bruksanvisning

Notera: A GU10 LED bulb is ingår ej och måste köpas separat.

Packaging box for Philips myLiving PONGEE LED Spot Light

Figur 2: Produktförpackning

4. Installation och installation

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. Förbered installationsområdet: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. Koppla från strömmen: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. Montera basen: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. Anslut fixturen: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. Installera glödlampan: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. Fäst fixturkroppen: Secure the main body of the spot light to the mounted base.
  7. Återställ ström: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Bruksanvisning

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

  • Slå på/av: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
  • Justera ljusets riktning: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Underhåll

  • Rengöring: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
  • Byte av glödlampa:
    1. Stäng av strömförsörjningen vid strömbrytaren.
    2. Låt glödlampan svalna helt.
    3. Vrid försiktigt den gamla GU10-lampan moturs för att ta bort den ur sockeln.
    4. Sätt i en ny GU10 LED-lampa genom att rikta in stiften och vrida medurs tills den sitter ordentligt.
    5. Återställ strömmen.

7. Felsökning

ProblemMöjlig orsakLösning
Ljuset tänds inte.
  • Ingen strömförsörjning.
  • Glödlampan är trasig eller inte korrekt installerad.
  • Lös ledningsanslutning.
  • Kontrollera strömbrytaren eller säkringen.
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Kontakta en kvalificerad elektriker för att kontrollera kabelanslutningarna.
Ljusa flimrar.
  • Lös glödlampsanslutning.
  • Inkompatibel dimmerbrytare (om tillämpligt).
  • Defekt glödlampa.
  • Se till att glödlampan är ordentligt vriden i sockeln.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Byt ut glödlampan.

8. Specifikationer

  • Stämpla: Philips belysning
  • Modellnummer: 5058131PN
  • Produktmått (L x B x H): 10 x 13.8 x 8.2 cm
  • Artikelvikt: 345 gram
  • Material: Metall
  • Färg: Vit
  • Stil: Modern
  • Typ av ljuskälla: LED
  • Bulb Socket Type: GU10
  • Antal glödlampor: 1 (glödlampa ingår ej)
  • Ingång Voltage: 220-240 volt
  • Strömkälla: Electrical cable (wired)
  • Installationstyp: Surface Mount (Ceiling/Wall)
  • IP-betyg: IP20 (endast inomhusbruk)
  • Specialfunktioner: Energy-efficient, Swivel head
  • Specifika användningsområden: Hem, Sovrum, Vardagsrum

9. Garanti och support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webwebbplats. Du kan också kontakta din återförsäljare för hjälp.

Spara ditt inköpsbevis för eventuella garantianspråk.