Superior Electronics Simply SUPTLB001 Universal Remote Control

1. Introduktion

The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.

2. Produktfunktioner

• Universal kompatibilitet: Controls a wide range of devices.
• Självlärande funktion: Easily acquires commands from existing remote controls.
• Two-Device Control: Manages up to two separate electronic devices.
• Stora knappar: Designed with oversized, clearly marked buttons for enhanced usability.
• Intuitiv design: Simple layout for straightforward operation.
• Quick Programming: Learning process typically takes less than one minute per button.

3. Inställning

3.1. Batteriinstallation

The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.

1. Leta reda på batterifackets lock på baksidan av fjärrkontrollen.
2. Skjut locket nedåt eller tryck på spärren och lyft för att öppna.
3. Sätt i två AAA-batterier och se till att de positiva (+) och negativa (-) polerna är korrekt inriktade med markeringarna inuti batterifacket.
4. Sätt tillbaka batterifackets lock och skjut det på plats tills det klickar ordentligt.

Image: Back of the remote control, indicating the battery compartment.

3.2. Learning Function Programming

The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.

1. Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
2. Gå in i inlärningsläge: Tryck och håll ned DRIVA button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
3. Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
4. Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
5. Sändningssignal: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
6. Upprepa för andra knappar: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
7. Avsluta inlärningsläge: Once all desired buttons are programmed, press the DRIVA button on the Simply remote again to exit learning mode. The indicator light will turn off.

Notera: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.

Bild: Fram view of the Simply SUPTLB001 remote control.

4. Bruksanvisning

After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.

• Val av enhet: Tryck på A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
• Ström på/av: Tryck på DRIVA knappen för att slå på eller av den valda enheten.
• Volymkontroll: Använd V+ button to increase volume and V- för att sänka volymen.
• Program/Channel Control: Använd P+ button to go to the next program/channel and P- to go to the previous program/channel.
• AV-ingång: Tryck på AV button to switch between video input sources on your television.

The functionality of each button depends on how it was programmed during the learning process.

5. Underhåll

• Rengöring: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
• Batteribyte: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
• Lagring: Förvara fjärrkontrollen på en torr plats, borta från direkt solljus och extrema temperaturer.

6. Felsökning

7. Specifikationer

Bild: Sida view av fjärrkontrollen med ungefärliga mått.

8. Garanti och support

This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 år från inköpsdatum.

For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webwebbplats. Vänligen spara ditt inköpsbevis för garantivalidering.