Braytron 12W varmvit LED infälld spotlight användarmanual (modell LD-426-2x)

1. Introduktion

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Braytron 12W Warm White LED Recessed Spotlights. These ultra-slim LED panels are designed for various indoor applications, offering high luminous power and energy efficiency.

The product features a compact, flat design with a low installation depth, making it suitable for ceilings in living rooms, kitchens, offices, and commercial spaces.

2. Säkerhetsinformation

• Koppla alltid bort strömmen före installation, underhåll eller rengöring.
• Installationen ska utföras av en kvalificerad elektriker i enlighet med lokala elföreskrifter.
• Modifiera inte produkten på något sätt. Obehöriga modifieringar kan ogiltigförklara garantin och utgöra säkerhetsrisker.
• Ensure the product is suitable for the intended environment. This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is intended for indoor use only.
• Förvara förpackningsmaterial utom räckhåll för barn.
• Titta inte direkt in i LED-ljuskällan när den är tänd.

3. Paketets innehåll

Paketet innehåller följande komponenter:

• 2 x Braytron 12W Warm White LED Slim Panels
• 2 x Integrated Transformers (pre-mounted)
• 2 x Mounting Clips (pre-mounted)

Figure 1: Braytron 12W Warm White LED Recessed Spotlight (front view).

Bild 2: Bak view of the LED spotlight showing the pre-mounted transformer and spring clips for installation.

4. Installation och installation

1. Förberedelse: Se till att strömförsörjningen till installationsområdet är avstängd vid huvudströmbrytaren.
2. Skära ut: Create a circular opening in the ceiling with a diameter of approximately 155 mm (6.1 inches). Refer to Figure 3 for detailed dimensions.
3. Kabeldragning: Connect the pre-mounted transformer to the AC 220-240V / 50/60 Hz power supply. Ensure all connections are secure and insulated.
4. Montering: Gently push the spring-loaded mounting clips on the sides of the spotlight upwards. Insert the spotlight into the prepared ceiling opening. The clips will spring back into place, securing the spotlight firmly against the ceiling.
5. Slutkontroll: När den är installerad, sätt tillbaka strömmen och testa lampan.

Figure 3: Dimensional drawing. Outer diameter: 172mm, Inner diameter (cut-out): 155mm, Height: 20mm.

5. Bruksanvisning

The Braytron LED Recessed Spotlight operates by connecting to a standard wall switch. Once properly installed and connected to the power supply, simply use the wall switch to turn the light on or off. The LED panel provides instant full brightness without any warm-up delay.

This product is not dimmable according to the product data sheet (Figure 4).

6. Underhåll

• Rengöring: Se till att strömmen är avstängd före rengöring. Använd en mjuk, torr eller lätt fuktadamp cloth to wipe the surface of the LED panel. Do not use abrasive cleaners or solvents.
• Inspektion: Periodically check for any visible damage to the light fixture or wiring. If damage is found, disconnect power and consult a qualified technician.
• Lamp Ersättning: The LED light source is integrated and not user-replaceable. The product has a long average lifespan of 30,000 hours.

7. Felsökning

If the problem persists after attempting these solutions, please contact a qualified electrician or the product supplier for assistance.

8. Specifikationer

Figure 4: Product Data Sheet (German). For detailed energy information, refer to the EPREL-databas.

Figure 5: EU Energy Label indicating energy efficiency class F (new rating system).

9. Garanti och support

Information regarding specific warranty terms and conditions for this product is not provided in this manual. Please refer to your purchase documentation or contact your retailer for details on warranty coverage and customer support.

For technical assistance or inquiries, please contact Braytron customer service or your local distributor.