MVMT Voyager D-MV01-S2 Multifunction Quartz Men's Watch Instruction Manual

Introduktion

Welcome to the instruction manual for your new MVMT Voyager D-MV01-S2 Multifunction Quartz Men's Watch. This guide provides essential information on setting up, operating, and maintaining your timepiece to ensure its longevity and accurate performance. Please read this manual thoroughly before using your watch.

Produkt överview

The MVMT Voyager D-MV01-S2 is a sophisticated multifunction quartz watch designed for versatility and style. It features a durable stainless steel case and band, a black round dial with dual time and 24-hour sub-dials, and is water-resistant up to 10 ATM (100 meters). This watch is equipped with a reliable quartz movement for precise timekeeping.

Bild 1: Framsidan view of the MVMT Voyager D-MV01-S2 watch, showcasing the black dial, sub-dials, and silver mesh band.

Figur 2: Vinklad view of the watch, highlighting the crown and pusher buttons on the side of the case.

Inställning

Inledande inspektion

Upon unboxing, carefully inspect your watch for any signs of damage. Ensure all protective films are removed from the crystal and case back.

Figure 3: The MVMT Voyager D-MV01-S2 watch presented in its original black box.

Batteriaktivering

Your MVMT Voyager watch comes with a pre-installed Lithium Ion battery. If the watch is not running, gently pull the crown out to position 2 (time setting position) and push it back in firmly. This should activate the battery and start the watch. If the watch still does not operate, refer to the Troubleshooting section.

Bruksanvisning

Setting the Main Time

1. Dra ut kronan till position 2. Sekundvisaren stannar.
2. Turn the crown to set the hour and minute hands to the desired time. Ensure you set the correct AM/PM by observing the 24-hour sub-dial (if applicable, or by advancing past 12 o'clock to see if the date changes).
3. Tryck tillbaka kronan till läge 0 för att starta klockan.

Ställa in datum

1. Dra ut kronan till position 1.
2. Turn the crown clockwise or counter-clockwise (depending on the movement) to set the date.
3. När rätt datum visas, tryck tillbaka kronan till position 0.

Using the Dual Time Function

The MVMT Voyager features a dedicated sub-dial for a second time zone. This allows you to track time in a different location simultaneously.

1. Identify the dual time sub-dial on your watch face. This sub-dial typically has its own small crown or pusher for adjustment. (Note: For specific adjustment methods, refer to the detailed diagram in your watch's packaging or contact support if no dedicated control is visible. Often, the dual time is linked to the main time setting or adjusted via a recessed pusher.)
2. Adjust the dual time sub-dial to the desired second time zone.

Använda kronograffunktionen

Your watch is equipped with a chronograph (stopwatch) function, indicated by the presence of pushers above and below the main crown.

1. Start: Tryck på den övre tryckknappen (A) för att starta kronografen. Kronografens sekundvisare börjar röra sig.
2. Stopp: Press the top pusher (A) again to stop the chronograph. The elapsed time will be displayed on the chronograph sub-dials.
3. Återställa: Press the bottom pusher (B) to reset the chronograph hands to their zero positions. This can only be done when the chronograph is stopped.

Underhåll

Rengöring

Wipe your watch regularly with a soft, dry cloth to remove dust and smudges. For stainless steel bands, a slightly damp trasa kan användas, följt av omedelbar torkning. Undvik att använda starka kemikalier eller slipande material.

Vattenbeständighet

Your MVMT Voyager watch is water-resistant up to 10 ATM (100 meters). This means it is suitable for swimming, snorkeling, and showering. However, it is inte suitable for high-impact water sports or diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the crown or pushers while the watch is wet or submerged.

Batteribyte

The watch uses a Silver Oxide battery. When the battery runs low, the second hand may start to skip seconds or stop entirely. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Remskötsel

The stainless steel mesh band is designed for durability. Avoid excessive bending or twisting of the mesh. Clean the band as described in the cleaning section. If you wish to change the strap, ensure you use a compatible 21mm interchangeable watch band.

Bild 4: Bak view of the MVMT Voyager D-MV01-S2 watch, displaying the case back and the clasp mechanism of the mesh band.

Felsökning

• Klockan går inte: Se till att kronan är helt intryckt. Om den fortfarande inte fungerar kan batteriet behöva bytas ut.
• Felaktig tid/datum: Follow the operating instructions to reset the time and date. Check if the crown was accidentally pulled out.
• Kondensation under kristall: This indicates a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent internal damage.
• Kronografvisare återställs inte till noll: If the chronograph hands do not return to the 12 o'clock position after resetting, consult a watch technician.

Specifikationer

Garantiinformation

Your MVMT Voyager D-MV01-S2 watch comes with a Two-Year Guarantee from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear (e.g., battery, strap, crystal damage). Please retain your proof of purchase for warranty claims.

Stöd

For further assistance, technical support, or warranty claims, please contact MVMT customer service through their official website or the retailer from whom you purchased the watch. Provide your watch model number (D-MV01-S2) and proof of purchase for efficient service.

You can visit the official MVMT store for more information: MVMT Store on Amazon