TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Paketets innehåll

Kontrollera att alla artiklar som listas nedan ingår i ditt paket. Om några artiklar saknas eller är skadade, vänligen kontakta din återförsäljare.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Strömadapter
• USB-mus
• Fjärrkontroll
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Snabbstartguide

Bild 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Säkerhetsinformation

Observera följande säkerhetsåtgärder för att förhindra personskador eller skador på enheten:

• Se till att strömförsörjningen voltage är korrekt innan du ansluter NVR:n.
• Do not expose the NVR to water or moisture.
• Undvik att placera NVR:n i direkt solljus eller nära värmekällor.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Överlåt all service till kvalificerad personal.
• Använd endast tillbehör som specificerats av tillverkaren.

3. Produkt överview

NVR Front and Rear Panels

Bild 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Indikatorer och kontroller på frontpanelen:

• DRIVA: Strömindikator.
• STATUS: Systemstatusindikator.
• Sändning/mottagning: Data transmission/reception indicator.
• Kontrollknappar: For menu navigation and system control.
• USB-port: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• LJUD IN/UT: För externa ljudenheter.
• LAN-port: Connect to your network router/switch.
• HDMI-utgång: Connect to a monitor for high-resolution video output (up to 4K).
• VGA-utgång: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Anslut den medföljande nätadaptern.
• Strömbrytare: För att slå på/av NVR:n.

Nyckelfunktioner

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• live support view, storage, and playback of connected cameras.

4. Inställning

4.1 Installation av hårddisk (valfritt)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Skruva loss och ta bort topphöljet på NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Fäst hårddisken på NVR-chassit med de medföljande skruvarna.
4. Sätt tillbaka topplocket och fäst det med skruvar.

4.2 Ansluta kameror

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Bild 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Anslut en bildskärm till NVR:ns HDMI- eller VGA-utgång.
• Anslut en USB-mus till en av NVR:ns USB-portar.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewförmågor.

4.4 Slå på

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Bruksanvisning

5.1 Guide för initial installation

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Live View

Efter den initiala installationen visar NVR:n live-läget. view av anslutna kameror. Du kan växla mellan att använda en enda kamera view och flerkamerarutnät view using the on-screen controls or the remote control.

5.3 Inspelning

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Uppspelning

Tillgång inspelad footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Nätverksåtkomst och fjärrstyrning Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Underhåll

6.1 Hårddiskhantering

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 firmwareuppdateringar

Kontrollera tillverkarens website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Rengöring

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Felsökning

• Ingen ström:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Ingen videoutgång:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kameror visar inte:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Ingen inspelning:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Fjärråtkomstproblem:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web webbläsarinställningar.

8. Specifikationer

9. Garanti och support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webSpara ditt inköpskvitto som inköpsbevis för garantianspråk.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.