Reloop RP-1000 MK2 Professional Belt Drive Turntable System

1. Introduktion

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-1000 MK2 Professional Belt Drive Turntable System. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

The Reloop RP-1000 MK2 is designed for both aspiring DJs and HiFi enthusiasts, offering high-quality audio reproduction through its belt-driven mechanism. This design effectively isolates the platter from motor vibrations, ensuring clear, distortion-free sound. The MK2 version features an enhanced top panel construction, improved metallic buttons, and a pre-fitted Ortofon OM Black pick-up system for immediate playback.

2. Säkerhetsinstruktioner

To ensure safe operation and prolong the life of your turntable, please observe the following safety guidelines:

• Strömförsörjning: Connect the unit only to an AC outlet with the correct voltage as indicated on the product. Ensure the power cord is not pinched or walked on.
• Fukt: Utsätt inte enheten för regn, fukt eller hög luftfuktighet. Placera inte föremål fyllda med vätska, såsom vaser, på enheten.
• Ventilation: Säkerställ tillräcklig ventilation runt enheten. Blockera inte ventilationsöppningarna.
• Värmekällor: Håll enheten borta från värmekällor som element, värmespjäll, spisar eller andra apparater (inklusive amplyftare) som producerar värme.
• Rengöring: Rengör endast med en torr trasa. Undvik att använda flytande rengöringsmedel eller aerosoler.
• Underhåll: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Placering: Place the turntable on a stable, level surface to prevent vibrations and ensure proper tracking.

3. Paketets innehåll

Kontrollera att alla artiklar som listas nedan ingår i ditt paket:

• Skivspelare tallrik
• OM Black pickup-system (från Ortofon)
• Huvudskal
• Slipmatta
• Motvikt
• Nätsladd
• Operating Instruction Manual (this document)

If any items are missing or damaged, please contact your retailer or Reloop customer support immediately.

4. Produkt överview

Familiarize yourself with the main components of your Reloop RP-1000 MK2 turntable.

Figur 4.1: Vinklad view av skivspelaren Reloop RP-1000 MK2, visadasing the platter, tonearm, and control panel.

Figur 4.2: Uppifrån och ner view highlighting the platter, slipmat with Reloop logo, S-shaped tonearm, and pitch control slider.

Figur 4.3: Detaljerad view of the S-shaped tonearm, headshell, and the pre-fitted Ortofon OM Black pick-up system.

Figure 4.4: Close-up of the power knob, start/stop button, and speed selection buttons (33/45 RPM).

Nyckelkomponenter:

• Tallrik: Precision-engineered, die-cast aluminum platter for stable rotation.
• Tonarm: Statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism.
• Patron: High-quality OM Black pick-up system by Ortofon, pre-fitted to a headshell.
• Tonhöjdskontroll: Adjustable slider with a range of +/-10% for fine speed adjustments.
• Speed Select Buttons: Buttons for selecting 33 1/3 RPM and 45 RPM playback speeds.
• Start/stopp -knapp: Styr rotationen av plattan.
• Målljus: Extendable aluminum target light to illuminate the needle position in dark environments.
• Shock-absorbing Feet: Improve isolation from unwanted vibrations.

5. Inställning

5.1 Uppackning och placering

1. Ta försiktigt ut alla komponenter ur förpackningen. Spara förpackningen för framtida transport eller förvaring.
2. Place the turntable on a flat, stable, and level surface, away from direct sunlight, heat sources, and strong magnetic fields.
3. Ensure there is sufficient space around the unit for ventilation.

5.2 Installation av platta och band

1. Placera plattan på mittaxeln. Se till att den sitter ordentligt.
2. Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and hook it onto the motor pulley, which is visible through one of the platter's openings.
3. Placera filtmattan ovanpå tallriken.

5.3 Tonearm Setup

The OM Black pick-up system is pre-fitted to the headshell. Follow these steps to balance the tonearm:

1. Attach the headshell with the pre-fitted cartridge to the front end of the tonearm. Secure it by turning the locking ring clockwise.
2. Place the counterweight onto the rear of the tonearm and rotate it until it is approximately centered.
3. Släpp tonarmen clamp and lower the tonearm lift.
4. Carefully adjust the counterweight by rotating it forwards or backwards until the tonearm is perfectly balanced and floats horizontally.
5. Once balanced, hold the counterweight steady and rotate only the numbered ring on the front of the counterweight to '0' (zero).
6. Rotate the entire counterweight (including the numbered ring) counter-clockwise to set the recommended tracking force for the Ortofon OM Black cartridge, typically between 1.5 to 2.0 grams. Refer to the cartridge manufacturer's specifications for the precise recommended tracking force.
7. Set the anti-skating dial to the same value as your tracking force.
8. Sätt tillbaka tonarmen i sitt viloläge och säkra den med klämman.amp.

5.4 Ljud- och strömanslutningar

1. Connect the RCA audio cables from the turntable's output to the PHONO input of your ampeller mixer. Säkerställ att vänster (vit) och höger (röd) kanal är korrekt anslutna.
2. Anslut jordkabeln från skivspelaren till jordterminalen på din ampluftrenare eller omrörare för att minimera brummande.
3. Plug the power cord into the turntable's power input and then into a suitable AC power outlet.

6. Bruksanvisning

6.1 Grundläggande användning

1. Ström på: Turn the power knob clockwise to the "ON" position. The platter will not start spinning until the START/STOP button is pressed.
2. Välj hastighet: Press the "33" or "45" button to select the desired playback speed according to the record you are playing. The corresponding LED will illuminate.
3. Platsrekord: Carefully place a vinyl record onto the platter.
4. Startfat: Press the START/STOP button. The platter will begin to rotate.
5. Position Tonarm: Släpp tonarmen clamp. Use the tonearm lift lever to raise the tonearm. Carefully move the tonearm over the desired track on the record.
6. Nedre tonarm: Gently lower the tonearm lift lever to allow the stylus to descend onto the record groove.
7. Spelar: The audio will now play through your connected audio system.
8. Stoppa uppspelning: At the end of the record, or when you wish to stop, use the tonearm lift lever to raise the tonearm, return it to its rest, and secure it with the clamp. Press the START/STOP button to stop the platter rotation.
9. Stäng av: Turn the power knob counter-clockwise to the "OFF" position when not in use.

6.2 Using Pitch Control

The pitch control slider allows you to finely adjust the playback speed by +/-10%. Move the slider up or down to increase or decrease the speed. The center detent indicates 0% pitch adjustment (nominal speed).

6.3 Target Light

Press the aluminum target light button to extend the light, illuminating the needle position. This is particularly useful in low-light environments. Press it again to retract the light.

7. Underhåll

7.1 Rengöring av enheten

• Koppla alltid ur nätsladden innan rengöring.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable.
• För envisa märken, en lätt damp trasa kan användas, omedelbart följt av en torr trasa. Undvik slipande rengöringsmedel eller lösningsmedel.

7.2 Skötsel av pennan

• Nålen är en ömtålig del. Hantera den med största försiktighet.
• Rengör pennan regelbundet med en mjuk borste avsedd för rengöring av pennan, och borsta försiktigt bakifrån och framåt.
• A worn or dirty stylus can damage your records and degrade sound quality. Replace the stylus when signs of wear are apparent (e.g., distorted sound, skipping).

7.3 Rembyte

The belt is a wear-and-tear part. If you notice inconsistent speed or the platter not spinning, the belt may need replacement. Contact Reloop support or an authorized service center for replacement belts and instructions.

7.4 Dust Cover Care (if applicable)

If your turntable includes a dust cover, clean it with a soft, damp cloth. Avoid using dry cloths as they can scratch the acrylic surface. Do not use harsh chemicals.

8. Felsökning

Innan du kontaktar supporten, vänligen läs följande vanliga problem och deras lösningar:

9. Specifikationer

10. Garanti och support

10.1 Garantiinformation

Reloop products are manufactured to the highest quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Reloop webwebbplatsen för detaljerade garantivillkor som gäller för din region.

Spara ditt inköpsbevis (kvitto eller faktura) eftersom det kommer att krävas för eventuella garantianspråk.

10.2 Kundsupport

Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Reloop customer support or your authorized dealer. Contact information can typically be found on the official Reloop webwebbplatsen eller på din produktförpackning.

For the latest information, FAQs, and support resources, please visit the official Reloop webplats: www.reloop.com