XPOWER X-35AR Pro

XPOWER X-35AR Pro Industrial Axial Fan

Instruktionsmanual

Introduktion

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your XPOWER X-35AR Pro Industrial Axial Fan. Please read all instructions carefully before use and retain this manual for future reference.

Säkerhetsinformation

  • Always ensure the fan is placed on a stable, level surface.
  • Använd inte fläkten med en skadad sladd eller kontakt.
  • Håll barn och husdjur borta från fläkten under drift.
  • Avoid placing objects through the fan grilles.
  • Koppla ur fläkten från eluttaget innan du rengör eller utför något underhåll.
  • This fan is designed for indoor use in high-temperature environments up to 180°F (82°C). It does not produce heat.

Inställning

Follow these steps to set up your XPOWER X-35AR Pro Axial Fan:

  1. Uppackning: Ta försiktigt ut fläkten ur förpackningen. Kontrollera om den har några skador under transporten.
  2. Placering: Position the fan on a firm, flat surface. Ensure there is adequate clearance around the intake and exhaust grilles for optimal airflow.
  3. Rack/Stand Adjustment: The fan includes a rack/stand that allows for 360-degree rotation. Loosen the adjustment knobs on the sides of the stand to tilt the fan to your desired angle. Tighten the knobs securely to lock the position.
XPOWER X-35AR Pro Industrial Axial Fan with adjustable stand
Figure 1: XPOWER X-35AR Pro Industrial Axial Fan. This image shows the fan mounted on its adjustable stand, ready for use.
Främre view of XPOWER X-35AR Pro Industrial Axial Fan
Bild 2: Framsidan view of the XPOWER X-35AR Pro Industrial Axial Fan. This image highlights the fan's grille and central XPOWER logo.

Bruksanvisning

To operate your XPOWER X-35AR Pro Axial Fan:

  1. Strömanslutning: Anslut fläktens nätsladd till ett vanligt eluttag.
  2. Ström på/av: Locate the power switch or button on the control panel. Press to turn the fan ON. Press again to turn it OFF.
  3. Variabel hastighetskontroll: The fan features variable speed control. Use the designated knob or buttons to adjust the airflow intensity from low to high, according to your requirements.
  4. Inbyggda eluttag: The fan is equipped with built-in power outlets. These allow you to daisy-chain multiple XPOWER fans for extended coverage or to power other compatible devices (e.g., power tools, mobile phone chargers). Ensure the total current draw does not exceed the fan's rated capacity.
  5. Justera luftflödesriktningen: Loosen the side knobs on the stand, adjust the fan to the desired angle (up to 360 degrees), and then re-tighten the knobs to secure its position.

Underhåll

Regelbundet underhåll säkerställer optimal prestanda och livslängd för din fläkt:

  • Rengöring: Disconnect the fan from the power source before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. For the grilles and blades, use a vacuum cleaner with a brush attachment or compressed air to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
  • Lagring: When not in use, store the fan in a clean, dry place. The fan can be stacked up to 5 units high for efficient storage or transportation. Wrap the 20 ft. power cord around the integrated cord wrap for neat storage.

Felsökning

ProblemMöjlig orsakLösning
Fläkten slås inte på.No power supply; power cord not fully plugged in; circuit breaker tripped.Kontrollera eluttaget; se till att sladden är ordentligt isatt; återställ strömbrytaren.
Minskat luftflöde.Grilles or blades are obstructed by dust/debris.Unplug fan and clean grilles and blades as per maintenance instructions.
Ovanligt ljud under drift.Loose components; debris inside the fan.Unplug fan and inspect for loose parts or foreign objects. If noise persists, contact customer support.

Specifikationer

SärdragDetalj
ModellnummerX-35AR Pro
StämplaXPOWER
Motor1/4 HP Sealed Induction Motor
Luftflöde (max)1720 CFM (kubikfot per minut)
Ampkapacitet (max)1.6 Amps
StrömkällaElektrisk med sladd
Voltage12 volt
Wattage184 watt
Produktmått (D x B x H)9.2 x 18.6 x 19.4 cm
Vikt17.6 pund
MaterialPolycarbonate Housing, Plastic Blades
Sladdlängd20 fot
SpecialfunktionerVariable Speed, Built-in Power Outlets, 360-degree Rotation, Stackable
Användning inomhus/utomhusInomhus

Garanti & Support

The XPOWER X-35AR Pro Industrial Axial Fan is backed by a 1 års begränsad tillverkargaranti. Denna garanti täcker defekter i material och utförande vid normal användning.

For warranty claims, technical support, or service inquiries, please contact XPOWER customer support. Refer to the official XPOWER webwebbplatsen eller produktförpackningen för den senaste kontaktinformationen.

© 2026 XPOWER Manufacture Inc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.