Armor3 M07385

Armor3 "ReadyHub" 3-Port HD Switcher User Manual

Modell: M07385

Introduktion

The Armor3 "ReadyHub" 3-Port HD Switcher allows you to connect up to three HD game consoles or other HD devices to a single HD display, such as an HDTV or monitor. This device simplifies your setup by eliminating the need to constantly swap cables, providing a convenient way to switch between your connected devices with the push of a button or via the included remote control. It supports 4K resolution, ensuring high-quality video output.

Paketets innehåll

Kontrollera att alla artiklar finns i ditt paket:

  • Armor3 "ReadyHub" 3-Port HD Switcher
  • Fjärrkontroll
  • Power Adapter (typically included for active switchers)

Note: HD cables are not included and must be purchased separately.

Armor3 ReadyHub 3-Port HD Switcher product packaging

Image: The Armor3 ReadyHub 3-Port HD Switcher shown in its retail packaging, highlighting its 4K and 3D compatibility.

Installationsinstruktioner

Follow these steps to connect your Armor3 "ReadyHub" HD Switcher:

  1. Anslut inmatningsenheter: Plug your HD game consoles (e.g., Nintendo Switch, PS4, Xbox One, Wii U, Xbox 360) or other HD devices into the "INPUT 1", "INPUT 2", and "INPUT 3" ports on the HD Switcher using HD cables.
  2. Anslut till skärmen: Connect one end of an HD cable to the "OUTPUT" port on the HD Switcher and the other end to an available HD input port on your HDTV or display.
  3. Anslut ström: Plug the included power adapter into the "DC 5V" port on the HD Switcher, then plug the adapter into a standard electrical outlet. The power indicator light on the switcher should illuminate.
  4. Välj ingång: Turn on your HD display and select the corresponding HD input channel that the switcher is connected to.
Armor3 ReadyHub 3-Port HD Switcher connected to cables with remote

Image: The Armor3 ReadyHub HD Switcher with HD cables connected to its input and output ports, alongside its remote control. This illustrates a typical setup configuration.

Bruksanvisning

Once connected, you can easily switch between your devices:

  • Manuell växling: Press the "SELECT" button on the front of the HD Switcher to cycle through the connected input devices (Input 1, Input 2, Input 3). The corresponding LED indicator will light up to show the active input.
  • Växling av fjärrkontroll: Use the included remote control to directly select the desired input. Press the "1", "2", or "3" button on the remote to switch to Input 1, Input 2, or Input 3 respectively.

Ensure that the device you wish to display is powered on for the switcher to detect its signal.

Underhåll

To ensure the longevity and optimal performance of your Armor3 "ReadyHub" HD Switcher:

  • Rengöring: Använd en mjuk, torr trasa för att rengöra enhetens utsida. Använd inte flytande rengöringsmedel eller slipande material.
  • Lagring: Store the switcher in a cool, dry place away from direct sunlight and extreme temperatures.
  • Hantering: Undvik att tappa enheten eller utsätta den för kraftiga stötar.

Felsökning

If you encounter issues with your HD Switcher, please refer to the following common problems and solutions:

ProblemLösning
Ingen signal på displayen.
  • Ensure all HD cables are securely connected to both the switcher and your devices/display.
  • Verify that the selected input on the switcher matches the active device.
  • Kontrollera om den anslutna enheten är påslagen och skickar ut en signal.
  • Testa en annan HD-kabel.
  • Ensure your display is set to the correct HD input channel.
Fjärrkontrollen fungerar inte.
  • Kontrollera batteriet i fjärrkontrollen och byt ut det vid behov.
  • Ensure there are no obstructions between the remote and the switcher's IR receiver.
  • Point the remote directly at the switcher.
Strömindikatorlampan är släckt.
  • Verify that the power adapter is securely plugged into both the switcher and a working electrical outlet.
  • Prova ett annat uttag.

Specifikationer

  • Modell: M07385
  • Ingångar: 3 x HD (HDMI)
  • Produktion: 1 x HD (HDMI)
  • Upplösningar som stöds: Upp till 4K
  • Kompatibilitet: Nintendo Switch, PlayStation 4, Xbox One, Nintendo Wii U, Xbox 360, and other HD devices.
  • Mått: 4.72 x 1.57 x 4.75 tum (12 x 4 x 12.06 cm)
  • Vikt: 3.2 ounce (90.7 gram)

Garanti och support

For warranty information or technical support, please contact Armor3 customer service. Details can typically be found on the product packaging or the official Armor3 webwebbplats. Vänligen spara ditt inköpsbevis för garantianspråk.

För ytterligare hjälp kan du besöka tillverkarens webwebbplatsen eller kontakta deras supportkanaler.