LIGHTSHARE 8 meter 132L LED-björkträdslampor (2-pack) bruksanvisning

Introduktion

Tack för köpetasing the LIGHTSHARE 8 Feet 132L LED Birch Tree Lights. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your product. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: LIGHTSHARE 8 Feet 132L LED Birch Tree Lights (2-Pack)

Säkerhetsinstruktioner

• Ensure the product is connected to a power source that matches the specifications provided.
• Denna produkt är avsedd för både inomhus- och utomhusbruk. Se till att alla elektriska anslutningar är skyddade från fukt vid användning utomhus.
• The adapter is UL certified and waterproof, providing a safe 24V low voltage -utgång.
• Do not attempt to modify or repair the product. Contact customer service for assistance.
• Håll borta från öppen låga och värmekällor.
• Position the trees on a stable, level surface. Use ground stakes for outdoor installation to prevent tipping.

Paketets innehåll

Kontrollera att alla komponenter finns i paketet:

• 2 x LED Birch Tree (8 Feet)
• 2 x Basstativ
• 2 x Power Adapter (UL certified, 24V)
• Ground Stakes (for outdoor use)

Monteringsanvisningar

Follow these steps to assemble your LIGHTSHARE LED Birch Trees:

1. Packa upp komponenter: Ta försiktigt ut alla föremål ur förpackningen.
2. Assemble Tree Trunk: Insert the tree trunk into its designated base. Rotate the trunk until it is securely fixed.
3. Connect Tree Top: Insert the top section of the tree into the assembled trunk.
4. Secure Base (Outdoor Use): If using outdoors, fix the base to the ground using the provided ground stakes.
5. Anslut ström: Connect the tree's cable to the power adapter. Ensure a secure connection.
6. Forma grenar: The branches are bendable. Gently shape them to achieve a natural and desired appearance.

Figure 2: Assembly steps for the LED Birch Tree.

Figure 3: Adjusting the bendable branches for desired shaping.

Drift

Once assembled and connected, plug the power adapter into a standard electrical outlet. The LED lights will illuminate, providing warm white light. To turn off, simply unplug the adapter from the outlet.

Figure 4: Detail of the warm white LED lights.

Underhåll

• To clean, gently wipe the branches and trunk with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Periodically check the power cord and adapter for any signs of damage. Discontinue use if damage is found.
• When storing, ensure the trees are dry and stored in a cool, dry place away from direct sunlight.

Felsökning

• Lamporna lyser inte: Ensure the power adapter is securely plugged into both the tree and the electrical outlet. Check if the outlet is functional.
• Unstable tree: Verify that the tree trunk is firmly inserted into the base. For outdoor use, ensure ground stakes are properly installed.
• Damaged branches: The branches are flexible. If a branch is bent out of shape, gently reposition it. If a branch is broken or lights are not working on a specific section, contact customer service.

Specifikationer

Garanti och support

LIGHTSHARE is committed to product quality and customer satisfaction. If you encounter any issues with your LED Birch Tree Lights, or require replacement parts, please contact LIGHTSHARE customer service. Refer to your purchase documentation for specific warranty details and contact information.