Introduktion
Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.
Säkerhetsinstruktioner
- Se till att apparaten placeras på en stabil, jämn yta, borta från direkt solljus och värmekällor.
- Doppa inte apparaten, nätsladden eller kontakten i vatten eller andra vätskor.
- Håll barn borta från apparaten under drift.
- Använd endast dricksvatten i ismaskinen.
- Dra ur sladden till apparaten före rengöring eller när den inte används under en längre tid.
- Använd inte apparaten med skadad sladd eller kontakt. Kontakta kvalificerad servicepersonal för reparationer.
- Säkerställ god ventilation runt enheten. Håll minst 10 cm utrymme runt sidorna och baksidan.
Produkt överview
Familiarize yourself with the components of your Hicon Ice Maker.
Figur 1: Kontrollpanelens layout
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.
Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.
Inställning
Uppackning och placering
- Remove all packaging materials and inspect the unit for any damage.
- Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
- Låt enheten stå upprätt i minst 2–4 timmar innan du ansluter den, särskilt om den har transporterats horisontellt. Detta gör att köldmediet kan sätta sig.
Tillsätter vatten
The Hicon Ice Maker offers two methods for water supply:
Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.
- Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
- Manuell vattenförsörjning: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.
Notera: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.
Bruksanvisning
- Ström på: Plug the appliance into a grounded electrical outlet. Press the PÅ/AV button on the control panel to start the unit.
- Välj isstorlek: Tryck på ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
- Isproduktion: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
- Indikator för full is: När iskorgen är full, IS FULLT indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
- Vatten Shortage-indikator: Om vattenbehållaren är låg, VATTEN SHORTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
- Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the VATTEN button. The water nozzle can be extended and retracted.
- Stäng av: Tryck på PÅ/AV knappen för att stänga av apparaten.
Notera: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.
Underhåll
Rengöring
- Innan rengöring: Always unplug the ice maker from the power outlet.
- Interiör rengöring: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth damprengörs med en mild rengöringslösning. Skölj noggrant med rent vatten.
- Utvändig rengöring: Torka av utsidan med en mjuk, damp trasa. Använd inte slipande rengöringsmedel eller lösningsmedel.
- Dränering: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
- Rekommendation för första användning: For best taste, clean the unit thoroughly before its first use.
Lagring
If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.
Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Ismaskinen producerar inte is. | No water in reservoir; Water shortage-indikatorn är på. | Tillsätt vatten till behållaren. |
| Ice full indicator is on, but basket is not full. | Issensorn är blockerad eller smutsig. | Clean the ice sensor. Ensure ice is not piled up blocking the sensor. |
| Isbitarna är för små eller för mjuka. | Ambient temperature is too high; Water temperature is too high; First cycle of ice production. | Ensure unit is in a cool environment. Use cold water. The first few cycles may produce smaller ice. |
| Water dispenser not working. | No water in reservoir; Water nozzle is not extended. | Add water. Ensure the water nozzle is pulled out for dispensing. |
| Ovanligt ljud under drift. | Enheten är inte i våg; Interna komponenter vibrerar. | Ensure the unit is on a level surface. If noise persists, contact support. |
Specifikationer
- Stämpla: Hicon
- Modell: B07S3JLSKY
- Produktmått (D x B x H): 35.7 cm x 42.3 cm x 45.2 cm
- Isproduktionskapacitet: Upp till 25 kg per 24 timmar
- Islagringskapacitet: 1.2 kg
- Wattage: 160 watt
- Voltage: 220 volt
- Kylmedel: R600a
- Materialtyp: Plast
- UPC: 195893458158
Figur 4: Produktmått
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.
Garanti och support
The Hicon Ice Maker comes with a ett års garanti från inköpsdatum. Denna garanti täcker tillverkningsfel under normala användningsförhållanden.
For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.
Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.