1. Säkerhetsinformation
Läs och förstå alla instruktioner innan installationen påbörjas. Underlåtenhet att göra detta kan leda till elektriska stötar, brand eller andra skador som kan vara farliga eller till och med dödliga. Spara denna manual för framtida bruk.
- Stäng av strömmen vid säkringen före installation eller service.
- Rådfråga en behörig elektriker om du är osäker på installationsprocessen.
- Använd endast UL/ETL-listade kabelkontakter.
- Se till att alla elanslutningar är säkra och överensstämmer med lokala föreskrifter och förordningar.
- Försök inte ändra armaturen på något sätt.
- This fixture is designed for indoor use only in damp locations. Do not expose to direct rain.
2. Paketets innehåll
Kontrollera att alla komponenter finns innan installationen påbörjas:
- 1 PC LED Wall Sconce Unit
- 1 PC Mounting Bracket
- 3 PCS Wire Nuts
- 2 PCS Ball Nuts
- 2 PCS Mounting Screws
Figur 1: Ingående komponenter och produktmått.
3. Specifikationer
| Stämpla | MOLNIG BAY |
| Modellnummer | LWSC71593CBN |
| Färg | Borstad nickel |
| Material | Akryl, Metall |
| Mått (L x B x H) | 7 x 3.5 x 10 cm |
| Wattage | 15W |
| Voltage | 120V |
| Ljusstyrka | 800 XNUMX lumen |
| Färgtemperatur | 3000K (Warm White), 4000K (Neutral White), 5000K (Daylight) - Adjustable |
| Dimbar | Ja (Kompatibel med de flesta dimmers) |
| CRI | 90+ |
| Användning inomhus/utomhus | Inomhus (Damp Platsklassificering) |
| Certifieringar | FCC |
4. Installation och installation
Follow these steps to properly install your CLOUDY BAY LED Wall Sconce:
- Förbered för installation: Turn off the power at the circuit breaker to the outlet box where you will install the fixture. Ensure the power is off before proceeding.
- Fäst monteringsfäste: Secure the mounting bracket to the outlet box using the screws provided. Ensure the bracket is firmly attached.
- Gör elektriska anslutningar: Connect the fixture's wires to the corresponding house wires using the provided wire nuts. Match black to black (Live), white to white (Neutral), and green/bare copper to green/bare copper (Ground). Ensure all connections are tight and secure.
- Montera fixturen: Carefully align the fixture with the mounting bracket and secure it in place using the ball nuts.
- Återställ ström: När armaturen är ordentligt monterad, återställ strömmen till säkringen.
Video 1: Installation guide for the CLOUDY BAY 3CCT LED Wall Sconce. This video demonstrates the steps for wiring and mounting the fixture.
Figure 2: Product details highlighting internal components and the CCT switch location.
5. Bruksanvisning
5.1. Color Temperature Adjustment (CCT)
This fixture features an adjustable color temperature switch, allowing you to select between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight). The CCT toggle switch is located on the back of the fixture, accessible during installation or by carefully removing the fixture from the wall.
- 3000K (varmvit): Provides a soft, cozy light, ideal for relaxing environments.
- 4000K (Neutralvitt): Offers a balanced, natural light, suitable for general tasks.
- 5000K (dagsljus): Delivers a bright, crisp light, enhancing focus and visibility.
Figure 3: CCT selection options.
5.2. Dimningsfunktion
The CLOUDY BAY LED Wall Sconce is dimmable and compatible with most standard dimmers on the market. This allows you to adjust the brightness from 10% to 100% to suit your preference and create the desired ambiance.
- Ensure your dimmer switch is compatible with LED fixtures.
- Adjust the dimmer to achieve your desired light intensity.
Figure 4: Smooth dimming feature.
Figure 5: Compatible dimmer list.
6. Underhåll
To ensure the longevity and optimal performance of your LED wall sconce, follow these simple maintenance guidelines:
- Rengöring: Turn off the power before cleaning. Use a soft, dry or slightly damp cloth to wipe the fixture. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic shade.
- Inget glödlampsbyte: This fixture uses integrated LED chips and does not require bulb replacement.
- Regelbunden inspektion: Periodically check the fixture for any loose connections or signs of damage. If any issues are found, turn off the power and consult a qualified electrician.
7. Felsökning
If you experience issues with your LED wall sconce, refer to the following common problems and solutions:
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Armaturen lyser inte | No power to the fixture; Loose wiring; Faulty switch or circuit breaker. | Check circuit breaker and wall switch. Ensure all wire connections are secure. Test the outlet with another device. |
| Ljuset flimrar eller dimmar inkonsekvent | Incompatible dimmer switch; Loose wiring; Overloaded circuit. | Ensure dimmer is LED compatible (refer to Figure 5). Check for loose wiring. Reduce load on the circuit. |
| Felaktig färgtemperatur | CCT-brytaren är felaktigt inställd. | Adjust the CCT toggle switch on the fixture to your desired setting (3000K/4000K/5000K). |
Om problemet kvarstår efter att du har provat dessa lösningar, vänligen kontakta kundsupporten.
8. Garanti och support
8.1. Garantiinformation
CLOUDY BAY provides a 5 års tillverkargaranti for this LED wall sconce. Additionally, if for any reason you are not satisfied with your purchase, you may contact us for an easy and fast replacement within 3 years of purchase, based on 3-5 hours of everyday use.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
8.2. Kundsupport
For technical assistance, warranty claims, or any questions regarding your CLOUDY BAY LED Wall Sconce, please contact our customer support team:
- Online: Visit the CLOUDY BAY official webwebbplats för supportresurser och kontaktinformation.
- E-post: Se produktförpackningen eller den officiella webwebbplats för kundtjänstens e-postadress.
Please have your model number (LWSC71593CBN) and proof of purchase ready when contacting support.