JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler. This product is designed to allow M.2 NVMe SSDs (PCIe protocol) to be used in a standard PCI Express X4, X8, or X16 slot, enhancing system performance with its PCIe 3.0 GEN3 full-speed design and integrated high-speed signal amplification technology. It is equipped with a cooling solution to maintain optimal SSD temperatures.

2. Säkerhetsinformation

Koppla alltid bort strömmen från datorn innan du installerar eller tar bort några interna komponenter.
Bär ett antistatiskt handledsband eller rör ofta vid jordade metallföremål för att förhindra skador på komponenterna genom elektrostatisk urladdning (ESD).
Handle the adapter and SSD by their edges to avoid touching sensitive components.
Se till att datorn har ordentlig ventilation i höljet för att förhindra överhettning.
Do not attempt to modify the product. Unauthorized modifications may void the warranty and pose safety risks.
Förvaras utom räckhåll för barn.

3. Paketets innehåll

Kontrollera att alla artiklar finns i paketet:

1x JEYI PCIE 3.0 X4 NVMe Adapter Card
1x JEYI Warship iStorm Cooler with Fan
Mounting screws and accessories (e.g., thermal pads, screwdriver if included)

Diagram showing the components included: heat sink, U frame, and various thermal pads.

Bild 3.1: Included components. This image illustrates the heat sink, U frame, and different thicknesses of thermal pads (0.5mm, 1mm, 0.8mm) that are part of the package.

4. Specifikationer

Särdrag	Beskrivning
Stämpla	JEYI
Modell	SK4+Warship iStorm
Tillverkarens referens	N27361-G
Hårdvarugränssnitt	PCI Express 3.0 X4
Compatible PCIe Slots	PCIe X4, X8, X16
SSD:er som stöds	NVMe M.2 SSDs (PCIe protocol)
Unsupported SSDs	M.2 NGFF disks (SATA protocol)
Kyl	Integrated Warship iStorm Cooler with Fan
Strömförsörjning	SATA 15-Pin 5V (for cooler fan)
Drag	JEYI high-speed signal enhancement technology, PCIe 3.0 GEN3 full-speed design, large capacity tantalum capacitor for stable voltage filtrering.
UPC	761882095002

Bild 4.1: Detailed product parameters. This image provides a summary of the product's key specifications, including its name, model, supported SSD types, and PCIe slot compatibility.

5. Inställning

5.1. Installing the M.2 NVMe SSD

Carefully align your M.2 NVMe SSD with the M.2 slot on the JEYI SK4 adapter. The adapter supports various M.2 SSD lengths (2230, 2242, 2260, 2280).
Insert the SSD into the slot at an angle and gently push it down until it is parallel with the adapter board.
Secure the SSD with the provided screw or movable copper stud at the appropriate length. The adapter includes movable copper studs to accommodate different M.2 SSD lengths.

Diagram showing the JEYI SK4 adapter supporting multiple M.2 SSD lengths: 22x30, 22x42, 22x60, 22x80.

Bild 5.1: M.2 SSD length compatibility. This image illustrates how the adapter supports various M.2 SSD lengths (2230, 2242, 2260, 2280) using movable copper studs.

5.2. Installing the Warship iStorm Cooler

Apply the thermal pads to the M.2 NVMe SSD. Ensure good contact between the SSD chips and the thermal pads.
Place the Warship iStorm cooler assembly over the SSD and adapter, aligning the mounting holes.
Secure the cooler to the adapter using the provided screws. Do not overtighten.

5.3. Installing the Adapter into a PCIe Slot

Power off your computer and disconnect the power cable.
Öppna ditt datorfodral.
Locate an available PCI Express X4, X8, or X16 slot on your motherboard.
Ta bort motsvarande skydd för expansionsplatsen från datorns hölje.
Carefully insert the JEYI SK4 adapter into the chosen PCIe slot, ensuring it is fully seated.
Secure the adapter to the computer case with a screw.

Assembled JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler, ready for installation into a PCIe slot.

Bild 5.2: Assembled adapter card. This image shows the JEYI SK4 adapter with the Warship iStorm cooler and an M.2 NVMe SSD installed, ready to be inserted into a PCIe slot.

5.4. Anslutning av strömkabeln

Locate the small power cable extending from the Warship iStorm cooler.
Connect the SATA 15-Pin 5V connector of this cable to an available SATA power connector from your power supply unit (PSU). This connection is essential for the cooling fan to operate.

Image showing the 50cm long SATA 15-Pin 5V power supply cable for the cooler fan.

Bild 5.3: Cooler power connection. This image highlights the 50cm long SATA 15-Pin 5V power cable that connects the cooler fan to the power supply unit.

6. Drift

After successful installation, close your computer case, reconnect the power cable, and power on your computer.

Drivrutinsinstallation: Most modern operating systems (Windows 10/11, Linux kernels 4.0+, macOS) have native support for NVMe SSDs and typically do not require additional drivers. If the SSD is not detected, check your motherboard's BIOS/UEFI settings to ensure PCIe slots are configured correctly and NVMe support is enabled.
SSD Initialization: For a new SSD, you may need to initialize it and create partitions using your operating system's disk management tools before it can be used.
Kylprestanda: The integrated Warship iStorm cooler with its fan will automatically operate to dissipate heat from the NVMe SSD, helping to maintain optimal performance and prevent thermal throttling.

Image showing a temperature reduction of 10-40°C with the iStorm Pro cooler.

Bild 6.1: Cooling performance indication. This image suggests that the iStorm Pro cooler can reduce SSD temperatures by 10-40°C, contributing to stable operation.

7. Underhåll

Rengöring: Periodically inspect the cooler fan and heatsink for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the computer is powered off and unplugged before cleaning.
Anslutningskontroll: Occasionally verify that the adapter is securely seated in the PCIe slot and that the SATA power cable for the cooler is firmly connected.
Termiska dynor: If you need to remove and re-install the SSD or cooler, inspect the thermal pads. Replace them if they appear damaged or have lost their adhesive properties to ensure effective heat transfer.

Diagram illustrating heat dissipation through double-sided copper holes on the adapter for better cooling.

Bild 7.1: Cooling design. This image shows the double-sided copper holes on the adapter, which are designed to enhance heat dissipation and improve overall cooling efficiency.

8. Felsökning

Problem	Möjlig orsak	Lösning
SSD not detected by the system.	Adapter not fully seated in PCIe slot. M.2 NVMe SSD not properly installed on the adapter. Motherboard BIOS/UEFI settings. SSD is M.2 NGFF (SATA protocol) instead of NVMe (PCIe protocol).	Ensure the adapter is firmly seated in the PCIe slot. Re-seat the M.2 NVMe SSD on the adapter. Check BIOS/UEFI for PCIe slot configuration and NVMe support. Verify that your SSD is an NVMe (PCIe) type, not an NGFF (SATA) type. This adapter does not support SATA M.2 SSDs.
Cooling fan not spinning.	SATA power cable not connected or loose. Fläktfel.	Ensure the SATA 15-Pin 5V power cable is securely connected to both the cooler and the PSU. Contact support if the fan still does not spin after verifying power connection.
SSD overheating or thermal throttling.	Poor contact with thermal pads. Insufficient airflow in the computer case. Kylfläkten fungerar inte.	Re-apply thermal pads, ensuring good contact with the SSD and heatsink. Improve case airflow by adding or repositioning case fans. Refer to "Cooling fan not spinning" troubleshooting steps.

9. Garanti och support

9.1. Garantiinformation

The JEYI SK4 NVMe PCI-E Adapter with Warship iStorm Cooler comes with a fem års garanti från inköpsdatum. Denna garanti täcker material- och tillverkningsfel vid normal användning. Den täcker inte skador orsakade av felaktig användning, olyckor, obehörig modifiering eller felaktig installation. Vänligen spara ditt inköpsbevis för garantianspråk.

9.2. Teknisk support

For technical assistance, troubleshooting, or warranty inquiries, please contact JEYI customer support through their official webwebbplatsen eller återförsäljaren som du köpte produkten från.

JEYI SK4+Warship iStorm