VISION Talking analog och digital klocka användarmanual

Introduktion

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Bild 1: Framsidan view of the VISION Talking Analog and Digital Watch.

Inställning

1. Uppackning och första inspektion

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Initial Time Setting (Analog)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Bruksanvisning

Knappfunktioner

• MODE-knapp: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• TIMMAR-knapp: Used to adjust the hour in setting modes.
• MINUTE Button: Used to adjust the minute in setting modes.
• Krona: Used to set the analog hands.

Telling Time

• Röstmeddelande: Tryck på TALANDE button to hear the current time spoken aloud in Spanish.
• Digital skärm: The digital display shows the time in a 12-hour format (AM/PM).
• Analog display: The traditional hands indicate the hour and minute.

Ställa in digital tid

1. Tryck på LÄGE button repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
2. Använd TIMME button to adjust the hour. Pay attention to AM/PM indicators.
3. Använd MINUT för att justera minuterna.
4. Tryck på LÄGE button again to confirm and exit the time setting mode.

Ställa in larm

1. Tryck på LÄGE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. Använd TIMME knappen för att ställa in önskad alarmtimme.
3. Använd MINUT knappen för att ställa in önskade alarmminuter.
4. Tryck på LÄGE knappen för att aktivera larmet och avsluta inställningsläget.
5. To turn off a sounding alarm, press any button.

Underhåll

Rengöring

För att rengöra din klocka, torka den försiktigt med en mjuk, torr trasa. För envis smuts, torka av den lätt med en lättamp cloth can be used, but ensure no moisture enters the watch. Avoid using harsh chemicals or abrasive materials.

Batteribyte

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Vattenbeständighet

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is inte suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Felsökning

• No Voice Announcement:
  • Kontrollera batterinivån. Byt ut om den är låg.
  • Ensure the TALKING button is pressed firmly.
• Den digitala displayen är tom eller svag:
  • Battery may be depleted. Replace the battery.
• Tiden är felaktig:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• Larmet ljuder inte:
  • Ensure the alarm is set correctly and activated.
  • Kontrollera batterinivån.

Specifikationer

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Figur 6: Examples of wrist circumference fit (20 cm and 12 cm).

Garanti och support

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.