Altec Lansing Super Lifejacket Jolt Bluetooth Speaker

1. Introduktion

Thank you for choosing the Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use.

Image 1: Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This image shows the front view of the speaker, highlighting its rugged design and speaker grilles.

Vad finns i kartongen:

• Altec Lansing Super Lifejacket Jolt Speaker
• AC -laddningskabel

2. Produktfunktioner

• Customizable Lights: Features 5 different LED light modes that can illuminate in a solid color, flash, or sync to the beat of your music.
• Sann trådlös parning: Allows pairing with another compatible speaker for ampförstärkt ljud.
• Integrerad laddning: Includes a Qi wireless charging pad and built-in dual USB charging ports for external devices.
• Förlängd batteritid: Provides up to 30 hours of battery life.
• Everything Proof: IP68 rated for waterproof, snowproof, and shockproof protection, and designed to float in water.

3. Kontroller och indikatorer

Familiarize yourself with the buttons and controls located on the top panel of your Super Lifejacket Jolt speaker.

• Strömknappen (⏻): Press and hold for 3-5 seconds to turn the speaker on or off.
• Link Button (🔗): Used to connect your speaker to Bluetooth and to enable House Party pairing mode.
• Lighting Button (✱): Controls the lighting effects on your speaker. Cycle through multicolor slow fade, beat-to-music, solid color, slow fade, and off.
• Minusknapp (-): Decreases music volume. Can also be used to go back to the previous song.
• Plusknapp (+): Increases music volume. Allows you to jump to the next song.
• Microphone Button (🎤): Answers calls and accesses voice assistant features.
• Qi Charging Pad: Located on the top center, allows for wireless charging of Qi-enabled devices.

4. Inställning

4.1 Laddning av högtalaren

Before initial use, fully charge your Super Lifejacket Jolt speaker. A full charge typically takes 5 to 6 hours.

1. Open the protective flap on the side of the speaker to reveal the charging port.
2. Plug one end of the included AC charging cable into the DC IN port on the speaker.
3. Anslut den andra änden av laddningskabeln till en strömkälla.
4. The power button LED will illuminate red while charging. It will turn off when fully charged.

Image 2: Speaker with charger. This image displays the speaker alongside its AC charging adapter, illustrating the charging setup.

4.2 Slå på/av

To power on your speaker, press and hold the Power Button (⏻) located on the top of the speaker for 3 to 5 seconds. You will hear an audible prompt indicating it's powering on. To power off, repeat the same action.

4.3 Bluetooth-parning

After powering on, the LED light on the Link Button (🔗) will begin flashing blue, indicating it's ready for pairing.

1. Aktivera Bluetooth på din enhet (smartphone, surfplatta etc.).
2. Leta efter tillgängliga Bluetooth-enheter.
3. Select "Super Lifejacket Jolt" from the list.
4. Once paired, the Link Button LED will stop flashing and remain solid blue.

5. Bruksanvisning

5.1 Qi Wireless Charging

The speaker features a Qi wireless charging pad to charge compatible devices. Ensure your speaker is powered on to use this feature.

1. Place your Qi-enabled device directly onto the Qi charging pad on top of the speaker.
2. Your device should indicate that it is charging wirelessly.

Image 3: Speaker at a picnic. This image shows the speaker in an outdoor setting, with a smartphone placed on its Qi charging pad.

5.2 Customizable LED Lights

Tryck på belysningsknappen (✱) to cycle through the 5 available LED light modes:

• Multicolor Slow Fade
• Beat-to-Music
• Enfärgad färg
• Långsam uttoning
• Av

5.3 House Party Pairing

For an enhanced audio experience, you can pair two Super Lifejacket Jolt speakers together using House Party pairing mode. Refer to the Altec Lansing website for detailed instructions on enabling this feature.

6. Underhåll

The Super Lifejacket Jolt is designed for durability and outdoor use with an IP68 rating, making it waterproof, snowproof, and shockproof. It also floats in water.

Image 4: Speaker floating in water. This image demonstrates the speaker's ability to float, highlighting its waterproof design.

Rengöring:

För att rengöra högtalaren, använd en mjuk, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or protective seals. Ensure all port covers are securely closed before exposing the speaker to water.

Lagring:

Förvara högtalaren på en sval, torr plats borta från direkt solljus och extrema temperaturer när den inte används under längre perioder.

7. Felsökning

If you encounter issues with your speaker, try the following steps:

• Ingen ström: Ensure the speaker is fully charged. Connect it to a power source using the provided AC adapter.
• Kan inte para ihop Bluetooth: Make sure the speaker is in pairing mode (flashing blue LED on Link Button). Turn off and on your device's Bluetooth, then try pairing again. Ensure no other devices are currently connected to the speaker.
• Inget ljud: Check the volume levels on both the speaker and your connected device. Ensure the speaker is successfully paired via Bluetooth.
• Qi Charging Not Working: Confirm your device is Qi-enabled and properly aligned on the charging pad. Ensure the speaker is powered on.

For further assistance, please visit the Altec Lansing support webplats.

8. Specifikationer

9. Garanti och support

Garantiinformation:

Denna produkt levereras med en 1 års full garanti from the manufacturer, Altec Lansing. Please retain your proof of purchase for warranty claims.

Kundsupport:

For additional support, troubleshooting tips, or to register your product, please visit the official Altec Lansing webplats: www.alteclansing.com