PerfectPro DABPRO DPR2 Radio Instruction Manual

1. Introduktion

Thank you for choosing the PerfectPro DABPRO DPR2 radio. This robust construction site radio is designed for professional use, offering DAB+ and FM radio reception, Bluetooth connectivity, and an AUX input. It is built to be shock-resistant and features an IP54 rating for dust and splash protection. This manual provides essential information for the safe and efficient operation of your device.

2. Säkerhetsinformation

• Läs alla instruktioner innan du använder enheten.
• Utsätt inte radion för extrema temperaturer, direkt solljus eller hög luftfuktighet.
• Se till att nätsladden inte är skadad och att den är korrekt ansluten till ett lämpligt eluttag.
• Only use the specified power adapter and battery type.
• Försök inte öppna eller reparera enheten själv. Överlåt all service till kvalificerad personal.
• Keep the unit away from water and other liquids, despite its splash protection.

3. Produkt överview

Frontpanel

This image shows the front panel of the PerfectPro DABPRO DPR2 radio, featuring the display, control knobs for volume and tuning, and preset buttons. The main speaker grille is visible at the bottom.

Kontrollpanelens detalj

En detaljerad view of the radio's control panel, highlighting the display screen, volume and tuning dials, and numbered preset buttons (1-5) for quick station access.

Bakre panel

Baksidan view of the PerfectPro DABPRO DPR2 radio, illustrating the integrated power cord storage compartment and the AUX input port. The antenna is also visible.

4. Inställning

4.1 Uppackning

Carefully remove the radio from its packaging. Verify that all components are present: the PerfectPro DABPRO DPR2 radio unit and this instruction manual. Inspect the unit for any signs of damage.

4.2 Slå på

The DABPRO DPR2 can be powered by AC mains or its internal rechargeable battery.

• AC Power: Unwind the integrated power cord from the rear compartment and plug it into a standard wall outlet (AC 230V~50Hz). The radio will automatically begin charging its internal battery while operating.
• Batterieffekt: The radio contains a rechargeable battery. Ensure it is sufficiently charged for portable use. The 'Charge' indicator light on the front panel will illuminate during charging.

4.3 Antennpositionering

Extend the telescopic antenna fully for optimal DAB+ and FM radio reception. Adjust its direction to improve signal strength if reception is poor.

5. Bruksanvisning

5.1 Grundläggande kontroller

• Strömknappen (U): Press to turn the radio on or off.
• Volymknapp: Rotate the left knob to adjust the audio volume.
• Stämnings-/valratt: Rotate the right knob to browse stations or menu options. Press the knob to select.
• Källknapp: Press the left knob (labeled 'VOLUME / SOURCE') to cycle through input modes: DAB+, FM, Bluetooth, AUX.

5.2 DAB+-radiofunktion

1. Turn on the radio and select DAB+ mode using the Source button.
2. The radio will automatically perform a full scan for available DAB+ stations on first use. To initiate a scan manually, navigate to the menu using the 'INFO / MENU' button and select 'Full Scan'.
3. Rotate the Tuning/Select knob to browse the list of available stations. Press the knob to select a station.
4. To save a preset: Tune to the desired station, then press and hold one of the numbered preset buttons (1-5) until the display confirms the save.
5. To recall a preset: Briefly press the corresponding numbered preset button (1-5).

5.3 FM-radiofunktion

1. Turn on the radio and select FM mode using the Source button.
2. Rotate the Tuning/Select knob to manually tune to a frequency.
3. To auto-scan for the next available station, press and hold the Tuning/Select knob briefly.
4. To save a preset: Tune to the desired station, then press and hold one of the numbered preset buttons (1-5) until the display confirms the save.
5. To recall a preset: Briefly press the corresponding numbered preset button (1-5).

5.4 Bluetooth-anslutning

1. Turn on the radio and select Bluetooth mode using the Source button. The display will show 'Pairing' or 'Waiting for connection'.
2. Aktivera Bluetooth på din Bluetooth-aktiverade enhet (t.ex. smartphone, surfplatta) och sök efter tillgängliga enheter.
3. Select 'PerfectPro DABPRO' from the list of devices.
4. Once connected, the radio will confirm the connection on its display, and you can play audio from your device through the radio.

5.5 AUX-ingång

1. Turn on the radio and select AUX mode using the Source button.
2. Connect an external audio device (e.g., MP3 player, smartphone) to the AUX input port on the rear of the radio using a 3.5mm audio cable (not included).
3. Play audio from your external device. The volume can be controlled via both the radio and the connected device.

6. Underhåll

• Rengöring: Torka av radion med en mjuk, damp trasa. Använd inte slipande rengöringsmedel eller lösningsmedel. Se till att alla portar är torra före användning.
• Batteriomsorg: For optimal battery life, avoid fully discharging the battery frequently. Charge the radio regularly, especially if it will be stored for extended periods.
• Lagring: Store the radio in a cool, dry place when not in use. Retract the antenna to prevent damage.

7. Felsökning

8. Specifikationer

This diagram provides the physical dimensions of the PerfectPro DABPRO DPR2 radio, showing its height, width, and depth for reference.

9. Garanti och support

PerfectPro offers a 1-year availability for spare parts for the DPR2 model. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or service inquiries, please visit the official PerfectPro webwebbplats eller kontakta deras kundtjänstavdelning. Kontaktuppgifter finns vanligtvis på produktförpackningen eller tillverkarens webplats.