Technics SL-1200MK7

Technics SL-1200MK7 direktdriven skivspelare bruksanvisning

Model: SL-1200MK7

Introduktion

This manual provides essential instructions for the proper setup, operation, and maintenance of your Technics SL-1200MK7 Direct Drive Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.

Technics SL-1200MK7 Direct Drive Turntable

Image: A black Technics SL-1200MK7 direct drive turntable, featuring a slipmat with the Technics logo, a tonearm, and pitch control faders. This image illustrates the overall design of the turntable.

Säkerhetsinstruktioner

To prevent electric shock, fire, damage, or injury, please observe the following safety precautions:

  • Utsätt inte denna enhet för regn eller fukt.
  • Ta inte bort locket. Låt endast kvalificerad personal utföra service.
  • Ensure the unit is placed on a stable, level surface to prevent vibrations and ensure proper operation.
  • Connect the unit to a grounded power outlet. Proper grounding is essential to prevent humming and ensure sound quality.
  • Undvik att placera enheten nära värmekällor eller i direkt solljus.
  • Förvaras utom räckhåll för barn.

Vad finns i lådan

Verify that all the following components are included with your Technics SL-1200MK7 turntable:

  • Skivspelare
  • Slipmatta
  • Slipsheet
  • Dammskydd
  • EP skivadapter
  • Balansvikt
  • Huvudskal
  • Screw set for cartridge
  • PHONO kabel
  • PHONO jordledning
  • Nätkabel
  • Ägarmanual (detta dokument)

Inställning

Follow these steps to properly set up your turntable:

  1. Uppackning och placering: Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from speakers to minimize vibration feedback.
  2. Stylus/Cartridge Installation: Attach your chosen cartridge to the head shell using the provided screw set. Note: A stylus is not included with the turntable and must be purchased separately.
  3. Tonearm Balance and Tracking Force:
    • Attach the head shell with the cartridge to the tonearm.
    • Mount the balance weight onto the rear of the tonearm.
    • Adjust the balance weight until the tonearm is perfectly level (floating freely).
    • Set the tracking force ring to "0" while the tonearm is balanced.
    • Rotate the balance weight to apply the recommended tracking force for your cartridge (typically 0-4g, as per the turntable's adjustment range).
  4. Justering mot skating: Set the anti-skating dial to match the tracking force you applied. This helps prevent the stylus from skipping inwards.
  5. Arm-Height Adjustment: The tonearm height can be adjusted from 0 to 6 mm to ensure the tonearm is parallel to the record surface when playing. Use the tonearm height adjustment ring at the base of the tonearm.
  6. Anslutningskablar:
    • Connect the PHONO cable from the turntable's output to the PHONO input on your amplifier eller mottagare.
    • Connect the PHONO earth lead (ground wire) from the turntable to the ground terminal on your amplivligare. Proper grounding is crucial to eliminate hum.
    • Connect the AC power supply cord to the turntable and then to a wall outlet.
  7. Dammskydd: Place the dust cover on the turntable to protect it when not in use.

Bruksanvisning

Once set up, operating your SL-1200MK7 is straightforward:

  1. Ström på: Slå på skivspelaren med strömbrytaren.
  2. Välj hastighet: Choose the appropriate speed (33-1/3, 45, or 78 rpm) using the speed selector buttons. For 78 rpm, ensure the switch is engaged.
  3. Platsrekord: Carefully place a record on the platter. If playing an EP record, use the provided adaptor.
  4. Starta uppspelning:
    • Lyft tonarmen med hjälp av signalspaken.
    • Tryck på START/STOPP button to begin platter rotation. The platter will reach the selected speed quickly due to the direct drive system (approx. 0.7 seconds to 33 1/3 rpm).
    • Placera försiktigt pennan över önskat spår på skivan.
    • Lower the tonearm gently using the cueing lever.
  5. Justera tonhöjd: Use the pitch control fader to fine-tune the playback speed if desired.
  6. Stoppa uppspelning: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOPP button to halt platter rotation.

Underhåll

Regelbundet underhåll säkerställer skivspelarens långa livslängd och optimala prestanda:

  • Rengöring av dammskyddet: Use a soft, dry cloth to wipe the dust cover. For stubborn marks, use a slightly damp trasa och torka omedelbart. Undvik slipande rengöringsmedel.
  • Cleaning the Platter and Chassis: Wipe the metal platter and turntable chassis with a soft, dry cloth. Do not use solvents or harsh chemicals.
  • Stylusvård: Regularly clean your stylus with a dedicated stylus brush or cleaner to remove dust and debris, which can affect sound quality and record wear.
  • Skivvård: Keep your records clean and stored properly to prevent dust accumulation and scratches.
  • Undvik vätskor: Do not spill liquids on the turntable. If liquid enters the unit, disconnect power immediately and consult a qualified technician.

Felsökning

Om du stöter på problem med din skivspelare, se följande vanliga problem och lösningar:

ProblemMöjlig orsakLösning
No sound or humming noiseImproper grounding; PHONO cable not connected; Stylus not installed correctly.Ensure the PHONO earth lead is securely connected to your amplifier's ground terminal. Verify PHONO cable connections. Check stylus installation and cartridge wiring.
Start/Stop button feels stiff or sticksButton pressed incorrectly (e.g., from the edge); Internal mechanism issue.Press the START/STOP button firmly and directly in the center. If the issue persists, contact customer support.
Ljudet är förvrängt eller hopparIncorrect tracking force or anti-skating; Dirty stylus; Damaged record.Re-adjust tracking force and anti-skating. Clean the stylus. Inspect the record for damage.
One channel is quieter than the otherLoose cartridge wiring; Damaged stylus; Imbalance in ampinställningar för värmare.Check the wiring between the cartridge and head shell. Inspect the stylus for damage. Verify ampinställningar för försäkringsbalans.
Feedback or vibration noiseTurntable placed on an unstable surface; Too close to speakers.Ensure the turntable is on a solid, level, and isolated surface. Move the turntable further away from speakers.

Specifikationer

Key technical specifications for the Technics SL-1200MK7 Direct Drive Turntable:

  • Typ: Direct Drive Manual Turntable
  • Skivspelarens hastigheter: 33-1/3, 45 rpm (with switch 78 rpm)
  • Startmoment: 0.18 N·m / 1.8 kg·cm
  • Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
  • Wow och fladdra: 0.025 % WRMS
  • Tallrikens diameter: 332 mm (13-5/64 tum)
  • Tonearm Effective Length: 230 mm (9-1/16 tum)
  • Tonearm Overhang: 15 mm (19/32 tum)
  • Tonearm Offset Angle: 22°
  • Spårningsfelvinkel: Within 2° 32’ (at the outer groove of 30 cm (12") record) / Within 0° 32' (at the inner groove of 30 cm (12") record)
  • Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
  • Arm-height Adjustment Range: 0–6 mm
  • Head Shell Weight: Ca. 7.6 g
  • Strömförsörjning: AC 110-240 V, 60 Hz
  • Energiförbrukning: 8 W
  • Mått (B x H x D): 453 x 169 x 353 mm (17.8 x 6.7 x 13.9 tum)
  • Vikt: Cirka. 9.6 kg / 21.2 lbs
  • Material: Metal (Chassis)
  • Färg: Svart

Garanti och support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Technics webplats.

Onlineresurser:

© 2023 Technics. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.