Viktig säkerhetsinformation
Read all instructions carefully before beginning installation. Failure to follow these instructions could result in electric shock, fire, or personal injury. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Koppla alltid bort strömmen vid huvudströmbrytaren före installation eller service.
- Säkerställ att alla elanslutningar görs i enlighet med lokala föreskrifter och förordningar.
- Mounting structure must be capable of supporting the fan's weight (approximately 19.4 lbs).
- Använd inte fläkten med skadade blad eller hölje.
- Denna fläkt är endast avsedd för inomhusbruk.
Paketets innehåll
Kontrollera att alla komponenter finns innan installationen påbörjas.
- Takfläktens motorhus
- 5 Reversible Fan Blades
- Blade Arms with Captive Screws
- Light Kit Assembly (4 Frosted Polypropylene Shades)
- 4 Dimmable ENERGY STAR LED Light Bulbs (8.5W, 3000K, 90CRI)
- Nedstång och tak
- Monteringshårdvara
- Installationsblad
Image: Cover of the AirPro Ceiling Fan Installation Manual, showing an illustration of the fan.
Installation och installation
Detta avsnitt ger en överview of the installation process. Refer to the included detailed installation sheet for complete step-by-step instructions.
Monteringsalternativ
The fan can be installed on either a flat ceiling or a sloped ceiling. Ensure the electrical box is securely mounted and rated for ceiling fan support.
Bladmontering
The fan features 5 reversible blades, offering a choice between a smooth black finish and a rustic charcoal finish. Attach the blades to the blade arms using the provided captive screws, which simplify the assembly process.
Bild: En närbild view of a fan blade, showing Side A with a black finish and Side B with a rustic charcoal finish, highlighting the reversible design.
Installation av ljussats
The light kit includes four frosted polypropylene shades and four LED bulbs. Install the light kit to the fan motor housing according to the detailed instructions in the manual. Ensure bulbs are securely seated.
Image: A collage of four close-up images showing different angles of the fan's motor housing, light kit, and pull chains, illustrating component details.
Image: A collage of four detailed images showing the fan blades in both black and rustic charcoal finishes, along with close-ups of the light kit and motor housing.
Bruksanvisning
Fläkthastighetskontroll
The fan speed is controlled by a pull chain. Pull the chain repeatedly to cycle through the three available fan speed settings (High, Medium, Low) and Off.
Lätt drift
The integrated light kit is operated by a separate pull chain. Pull the chain to turn the lights On or Off. The included LED bulbs are dimmable; however, an accessory wall or remote control (sold separately) is required for dimming functionality.
Reversible Blade Function
To change the direction of airflow for seasonal comfort, locate the reverse switch on the fan motor housing. In warm weather, set the switch to circulate air downward, creating a cooling effect. In cool weather, set the switch to circulate air upward, redistributing warm air without creating a draft.
Underhåll
Rengöring
För att rengöra fläkten, torka av med en mjuk, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components. Ensure power is disconnected before cleaning.
Byte av glödlampa
The fan uses 8.5-Watt LED bulbs. When replacing bulbs, ensure the power is off and allow bulbs to cool. Use only LED bulbs of the same wattage and base type to maintain optimal performance and energy efficiency.
Felsökning
If you experience issues with your ceiling fan, consult the following common troubleshooting steps:
- Fläkten startar inte: Kontrollera strömbrytaren och väggströmbrytaren. Se till att alla kablar är ordentligt anslutna.
- Lights Do Not Work: Verify bulbs are correctly installed and not loose. Check the light pull chain. Ensure power is supplied to the light kit.
- Överdrivet vinglande: Ensure all blade screws are tightened. Check that the fan is securely mounted to the ceiling junction box. Balance kit may be required (not included).
- Bullrig drift: Kontrollera att alla skruvar är åtdragna. Kontrollera om det finns några lösa delar eller hinder.
Om problemen kvarstår efter att du har försökt med dessa steg, kontakta kundsupporten.
Specifikationer
| Särdrag | Detalj |
|---|---|
| Modellnummer | P250081-31M-WB |
| Stämpla | Framstegsbelysning |
| Produktens mått | 52" D x 52" B x 18.7" H |
| Objektets vikt | 19.4 pund |
| Färg | Matte Black / Frosted |
| Design av elektrisk fläkt | Ceiling Fan |
| Strömkälla | Elektrisk med sladd |
| Voltage | 120 volt |
| Switch Typ | Dra kedjan |
| Kontrollmetod | Remote (accessory, sold separately) |
| Antal blad | 5 |
| Alternativ för bladfinish | Black, Rustic Charcoal (Reversible) |
| Ljussats | 4 Frosted Polypropylene Shades |
| Typ av glödlampa | LED (4 x 8.5W, 3000K, 90CRI) |
| Luftflödeskapacitet | 3330 kubikfot per minut |
| Effektivitet | ENERGY STAR rated, maximum efficiency |
| Användning inomhus/utomhus | Inomhus |
| Certifieringar | UL Listed, Title 24 JA8 rated |
Image: Diagram illustrating the dimensions of the ceiling fan, showing a 52-inch diameter and 18.7-inch height.
Image: A detailed product specification sheet for the AirPro Builder Fan, model P250081-31M-WB, listing performance data, dimensions, and certifications.
Garantiinformation
This Progress Lighting AirPro ceiling fan is covered by a 30 års begränsad garanti. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Progress Lighting webplats.
Kundsupport
For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer support. Refer to the contact information provided in your product packaging or on the official Progress Lighting webplats.