Introduktion
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampLäs den noggrant före användning och spara den för framtida bruk.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Säkerhetsinformation
För att säkerställa säker drift och förhindra skador, vänligen följ följande säkerhetsåtgärder:
- Endast för inomhusbruk: Denna lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Elsäkerhet: Se till att lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Värmevarning: Lamp and its contents become hot during operation. Do not touch the glass or base while the lamp är på eller omedelbart efter att du stängt av den. Låt den svalna tillräckligt länge.
- Stabil placering: Placera lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Håll borta från barn och husdjur: Due to the heat generated, keep the lamp utom räckhåll för barn och husdjur.
- Ventilation: Säkerställ tillräcklig luftcirkulation runt l:etamp för att förhindra överhettning. Täck inte överamp.
- Skadad sladd: Om nätsladden är skadad måste den bytas ut av tillverkaren eller en kvalificerad servicerepresentant för att undvika faror.
Paketets innehåll
Kontrollera att alla komponenter finns med vid uppackning:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Inställning
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Packa upp: Ta försiktigt ut alla komponenter ur förpackningen.
- Lampinstallation: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Fäst locket: Place the decorative cap onto the top of the glass vessel.
- Position Lamp: Placera den monterade lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Anslut ström: Anslut nätsladden till ett vanligt 120-volts eluttag.
Bruksanvisning
Operating your Jambo Liquid Motion Lamp är enkel:
- Sätta på: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Uppvärmningstid: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Drifttid: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Stänga av: För att stänga av lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Underhåll
Proper care will ensure the longevity and performance of your lamp:
- Rengöring: Se till att lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp i vatten.
- Byte av glödlampa: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Lagring: Om du förvarar lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Öppna inte: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Felsökning
If you encounter issues with your Jambo Liquid Motion Lamp, se följande vanliga problem och lösningar:
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Lamp tänds inte. | No power, faulty bulb, or loose connection. | Kontrollera om lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Se till att lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Specifikationer
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Särdrag | Detalj |
|---|---|
| Modellnummer | KL-217 |
| Mått (D x B x H) | 11.4 cm x 11.4 cm x 39.4 cm (ca 4.5 x 4.5 x 15.5 tum) |
| Skärmhöjd | 16 tum |
| Strömkälla | Elektrisk med sladd |
| Voltage | 120 volt |
| Wattage | 30 Watt |
| Typ av glödlampa | Glödande |
| Bulb Base | E17 |
| Switch Typ | Roterande |
| Basmaterial | Aluminium |
| Skärmmaterial | Glas |
| Finish Typ | Metallisk |
| Användning inomhus/utomhus | Inomhus |
| Vattentäthetsnivå | Inte vattentät |
| UPC | 850019692297 |
Garanti och support
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webwebbplats för kontaktinformation.