Atmosphera Jily Pendant Lamp D48 cm User Manual

1. Introduktion och säkerhetsinformation

Thank you for choosing the Atmosphera Jily Pendant LampDenna manual innehåller viktig information för säker installation, drift och underhåll av din nya belysningsarmatur. Läs dessa instruktioner noggrant före installation och spara dem för framtida bruk.

Viktiga säkerhetsvarningar:

• Koppla alltid bort strömförsörjningen vid huvudströmbrytaren innan du försöker installera, underhålla eller byta glödlampa.
• Installation must be performed by a qualified electrician or a competent person in accordance with local electrical codes.
• Securely fasten the pendant lamp to the ceiling using appropriate and robust mounting hardware suitable for the ceiling material.
• Undvik att exponera lamp to moisture or direct water contact to prevent damage and electrical hazards.
• Överskrid inte det maximala watttage som är specificerad för glödlampan (40W).
• Ensure the light bulb is fully cooled before attempting to replace it.

2. Vad finns i lådan

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1 x Jily Pendant Lamp Assembly (including shade, cable, and ceiling canopy)

Note: Light bulb (E27, max 40W) and mounting hardware for the ceiling are not included and must be purchased separately.

3. Installation och installation

This section outlines the general steps for installing your pendant lamp. Always refer to the safety warnings in Section 1 before beginning.

Verktyg som krävs (ingår ej):

• Skruvmejsel (Phillips och/eller platt huvud)
• Wire strippers
• Drill (if required for ceiling mounting)
• Penna
• Stege
• Voltage Testare

Installationssteg:

1. Stäng av strömmen: Locate the main circuit breaker and turn off the power to the circuit where you will be installing the lamp. Verify the power is off using a voltage testare.
2. Förbered tak: If replacing an existing fixture, carefully remove it. Ensure the ceiling junction box is secure and capable of supporting the lamp's weight (approximately 1.08 kg).
3. Mount Ceiling Canopy Bracket: Attach the mounting bracket (usually included with the lamp, inside the canopy) to the ceiling junction box using appropriate screws. Ensure it is firmly secured.
4. Justera kabellängden: The cable length is approximately 90 cm. Adjust the cable to your desired hanging height by feeding it through the ceiling canopy. Secure the cable at the desired length using the provided strain relief mechanism within the canopy.
5. Trådanslutningar: Anslut elkablarna från l:enamp to the corresponding wires from the ceiling. Typically, connect live (brown/black) to live, neutral (blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors. Ensure all connections are secure.
6. Attach Ceiling Canopy: Carefully push the ceiling canopy up against the ceiling, covering the wiring. Secure it to the mounting bracket using the screws provided.
7. Installera glödlampa: Screw an E27 base light bulb (max 40W, not included) into the lamp hållare. Dra inte åt för hårt.
8. Återställ ström: Slå på strömmen igen vid huvudströmbrytaren.
9. Testa Lamp: Turn on the light switch to ensure the lamp fungerar korrekt.

Image: Detail of the ceiling canopy, showing the connection point to the ceiling.

Image: The Jily pendant lamp, visaasing its full design and illuminated bulb.

4. Bruksanvisning

The Atmosphera Jily Pendant Lamp är utformad för enkel användning.

• Slå på/av: Styr lamp using a standard wall light switch connected to the circuit.
• Glödlampa: This fixture uses one E27 base light bulb. For optimal performance and light quality, choose a bulb that suits your preference (e.g., LED, incandescent, warm white).

Image: The Jily pendant lamp installed in a living space, demonstrating its aesthetic and light output.

5. Underhåll

Regular maintenance will help preserve the appearance and functionality of your pendant lamp.

Rengöring:

• Damning: Regularly use a soft, dry duster or a microfiber cloth to gently remove dust from the lampshade and other surfaces.
• Rengöring av fläckar: För envisa märken, torka lättampen a cloth with water (do not use harsh chemicals or abrasive cleaners) and gently wipe the affected area. Avoid excessive moisture, especially on the paper shade.

Byte av glödlampa:

1. Stäng av strömmen: Stäng alltid av strömmen till l:en.amp at the main circuit breaker and the wall switch before replacing the bulb.
2. Låt svalna: Ensure the old bulb has completely cooled down before touching it.
3. Ta bort gammal glödlampa: Carefully unscrew the old E27 bulb counter-clockwise.
4. Installera ny glödlampa: Skruva i en ny E27-lampa (max 40W) medurs tills den sitter ordentligt. Dra inte åt för hårt.
5. Återställ ström: Turn the power back on and test the new bulb.

Bild: Detaljerad view of the paper and iron lampshade material.

6. Felsökning

If you encounter issues with your pendant lamp, se följande vanliga problem och lösningar:

Om problemet kvarstår efter att du har försökt med dessa lösningar, vänligen kontakta en kvalificerad elektriker eller kundsupport.

7. Specifikationer

8. Garanti och support

Specific warranty information for the Atmosphera Jily Pendant Lamp may vary by region and retailer. Please refer to your purchase documentation or contact the retailer where you purchased the product for details regarding warranty coverage.

For technical support, missing parts, or further assistance, please contact the customer service department of ATMOSPHERA CREATEUR D'INTERIEUR or your retailer.

When contacting support, please have your model name (Jily) and model number (3560232579516) available.