VJOYCAR G20

VJOYCAR G20 GPS Digital Hastighetsmätare HUD Användarmanual

Modell: G20

Märke: VJOYCAR

1. Introduktion

The VJOYCAR G20 GPS Digital Speedometer HUD is designed to display real-time driving speed directly from GPS satellites. This head-up display offers a clear, large-font readout, making it easy to monitor your speed without diverting your attention from the road. It is universally compatible with all vehicles, including cars, trucks, SUVs, ATVs, pick-up trucks, scooters, golf carts, buses, trains, bikes, and motorcycles, as it operates independently of the vehicle's engine or OBD port.

The device features a 10 Hz high refresh rate VJOYCAR chipset, ensuring rapid and accurate speed updates. Its simple plug-and-play design requires no complex settings or button interactions, making installation and use straightforward. The G20 automatically powers on when the vehicle's ACC is detected as on, and powers off when the ACC is off, ensuring no power consumption when not in use.

VJOYCAR G20 GPS Digital Speedometer HUD and accessories

Figure 1.1: The VJOYCAR G20 GPS Digital Speedometer HUD with its included USB cable, non-slip mat, and packaging.

2. Paketets innehåll

När du öppnar paketet, vänligen kontrollera att alla följande artiklar finns med:

  • VJOYCAR G20 HUD Unit (Host)
  • 2 meter USB-kabel
  • Halkfri matta
  • Användarmanual (detta dokument)
VJOYCAR G20 GPS Digital Speedometer HUD packing list

Figure 2.1: Illustration of the VJOYCAR G20 HUD unit, 2m USB cable, non-slip mat, user manual, and gift box.

3. Installation och installation

The VJOYCAR G20 is designed for simple plug-and-play installation, requiring no complex wiring or configuration. Follow these steps to set up your device:

  1. Välj en plats: Place the HUD unit on your dashboard in a position that allows for clear visibility without obstructing your view of the road. The included non-slip mat can be used to secure the device.
  2. Anslut ström: Connect the provided USB cable to the Mini USB port on the HUD unit. Plug the other end of the USB cable into a USB port in your vehicle. If your vehicle does not have a USB port, you will need a car adapter (not included) to provide power.
  3. Initial GPS Signal Acquisition: Upon first use, the device will take approximately 10-30 seconds to acquire a GPS signal. Ensure the vehicle is outdoors and not in an underground parking lot or tunnel for proper signal reception. Once connected, the display will show "0" or the current speed.
VJOYCAR G20 GPS Digital Speedometer HUD USB connection

Figure 3.1: The USB cable connection for the VJOYCAR G20 HUD, illustrating its plug-and-play functionality.

VJOYCAR G20 GPS Digital Speedometer HUD on car dashboard

Figure 3.2: The VJOYCAR G20 HUD placed on a car dashboard, displaying speed.

Demonstrationsvideo för installation

Video 3.1: This video demonstrates the simple setup process of the VJOYCAR G20 Digital Speedometer HUD, including connecting the USB cable and placing the device on the dashboard. It also shows the device in operation, displaying speed in real-time.

4. Bruksanvisning

The VJOYCAR G20 operates automatically once connected to power and a GPS signal is acquired. There are no buttons or manual settings required for basic operation.

  • Automatisk ström på/av: The device will automatically turn on and display the driving speed when it detects that the car's ACC (Accessory) power is on. When the car's ACC is turned off, the device will automatically power down, ensuring no battery drain.
  • Hastighetsvisning: The large, green digital display shows your current speed in MPH (Miles Per Hour). The speed data is collected directly from GPS satellites, providing an accurate reading independent of your vehicle's internal systems.
  • Universal kompatibilitet: Due to its GPS-based operation, the G20 is compatible with virtually all types of vehicles, as it does not interfere with the car's engine or circuit board.
VJOYCAR G20 GPS Digital Speedometer HUD accurate speed display diagram

Figure 4.1: Diagram illustrating the accurate speed display of the GPS Digital Speedometer, showing consistency with dashboard readings.

VJOYCAR G20 GPS Digital Speedometer HUD vehicle compatibility

Figure 4.2: This image demonstrates the universal compatibility of the VJOYCAR G20 HUD with various vehicle types, including pick-up trucks, buses, new energy vehicles, gasoline/hybrid vehicles, and motorcycles, all connecting via a standard USB cable.

5. Underhåll

To ensure the longevity and optimal performance of your VJOYCAR G20 GPS Digital Speedometer HUD, please follow these simple maintenance guidelines:

  • Rengöring: Use a soft, dry cloth to wipe the display and the device's exterior. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
  • Lagring: När enheten inte används under längre perioder, förvara den på en sval, torr plats, skyddad från direkt solljus och extrema temperaturer.
  • Hantering: Handle the device with care to prevent drops or impacts, which could damage the internal electronics or the display.

6. Felsökning

If you encounter any issues with your VJOYCAR G20 HUD, please refer to the following common problems and their solutions:

  • Enheten slås inte på:
    • Ensure the USB cable is securely connected to both the HUD unit and the vehicle's USB port or car adapter.
    • Verify that the vehicle's ACC power is on. The device is designed to power on automatically with the vehicle.
    • If using a car adapter, ensure it is functioning correctly and providing 5V power.
  • No GPS Signal / Display Shows "0" for Extended Period:
    • For first-time usage or after a long period of inactivity, it may take 10-30 seconds for the device to acquire a GPS signal.
    • Ensure the vehicle is outdoors with a clear view of the sky. The device cannot acquire a GPS signal indoors, in underground parking lots, or in tunnels.
    • Relocate the device on the dashboard to a position with less obstruction from the vehicle's roof or other components.
  • Speed Reading Differs from Car Dashboard:
    • The GPS speedometer collects data directly from satellites, while car dashboards typically measure speed from tire rotation. A difference of 1%-5% is normal and expected. The GPS reading is generally considered more accurate.
  • Display Brightness Issues (Day/Night):
    • The device is designed for clear visibility day and night. Ensure the display is not obstructed by direct sunlight or reflections. Adjusting the placement on the dashboard might help.

7. Specifikationer

SärdragDetalj
ModellnummerG20
StämplaVJOYCAR
VisningstypDigital Head-Up Display (HUD)
HastighetskällaGPS Satellites
Uppdateringshastighet10 Hz (High Refresh Rate)
StrömingångUSB (5V)
MaterialAkrylnitril Butadien Styren (ABS)
Objektets vikt0.11 kilo
UPC610521672619
Först tillgänglig25 oktober 2022
VJOYCAR G20 GPS Digital Speedometer HUD close-up display

Figur 7.1: En närbild view of the VJOYCAR G20 HUD display, showing the clear green digital readout.

8. Garanti och support

VJOYCAR is committed to providing high-quality products and excellent customer service. The G20 GPS Digital Speedometer HUD comes with a manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact VJOYCAR customer support.

Our client service is available 7 days a week, 24 hours a day. If you have any questions, concerns, or require assistance with your device, please do not hesitate to contact us. We are here to help.

For further assistance, please visit the official VJOYCAR store or contact their customer support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.