1. Introduktion
The Einhell AQUINNA 18/28 Power X-Change garden pump is a cordless, battery-powered device designed for pumping water in various garden applications. It is part of the Einhell Power X-Change system, allowing for flexible use of compatible batteries and chargers (sold separately). This manual provides essential information for the safe and efficient operation, setup, and maintenance of your garden pump.
Please read these instructions carefully before using the pump for the first time and keep them for future reference.
Figure 1: The Einhell AQUINNA 18/28 Power X-Change garden pump, showcasing dess kompakta design och integrerade handtag.
2. Säkerhetsinstruktioner
Always observe the following safety precautions to prevent injury and damage to the pump.
Allmän säkerhet
- Läs alla instruktioner före användning.
- Se till att pumpen är placerad på en stabil, jämn yta.
- Do not operate the pump without water, as this can cause damage.
- Håll barn och obehöriga personer borta från arbetsområdet.
- Använd lämplig personlig skyddsutrustning (PPE) vid behov.
Electrical Safety (Battery)
- Only use original Einhell Power X-Change batteries and chargers.
- Utsätt inte batterier för vatten, värme eller direkt solljus.
- Förvara batterier på en torr plats i rumstemperatur.
- Remove the battery from the pump before any cleaning, maintenance, or storage.
Figure 2: Illustration indicating that the battery and charger are not included with the pump and must be purchased separately.
3. Komponenter överview
Familiarize yourself with the main components of your Einhell AQUINNA 18/28 garden pump:
- Bärhandtag: För enkel transport.
- Batterifack: For inserting the Power X-Change battery.
- På/av/lägesbrytare: To control pump operation and select power modes.
- Water Filling Screw: For filling the pump housing with water before operation.
- Suction Connection (Inlet): Threaded connection for the suction hose.
- Pressure Connection (Outlet): Threaded connection for the discharge hose.
- Water Drain Screw: For emptying the pump, especially for frost protection.
- Monteringshål: For securing the pump in a fixed location.
Bild 3: Närbild view of the robust metal threaded connections for suction and pressure hoses on the pump.
4. Inställning
4.1 Batteriinstallation
- Öppna batterifackets lock.
- Insert a charged Einhell Power X-Change 18V battery into the compartment until it clicks into place.
- Stäng batterifacket ordentligt.
Figure 4: Demonstrating the correct method for inserting a Power X-Change battery into the pump's battery compartment.
4.2 Anslutning av slangar
- Sugslang: Connect a suitable suction hose (minimum 1 inch diameter recommended) to the suction connection (inlet) of the pump. Ensure all connections are airtight to prevent air intake, which can reduce pump performance. The maximum suction depth is 6 meters.
- Utloppsslang: Connect a discharge hose to the pressure connection (outlet) of the pump. Secure all connections with appropriate clamps om det behövs.
4.3 Förbereda pumpen
Before initial operation, the pump housing must be filled with water to ensure proper function and prevent damage.
- Remove the battery from the pump.
- Unscrew the water filling screw located on the top of the pump.
- Carefully fill the pump housing with clean water until it overflows.
- Replace and tighten the water filling screw securely.
Figure 5: Close-up of the red water filling screw, used to prime the pump with water before operation.
5. Bruksanvisning
5.1 Starta pumpen
- Ensure the pump is primed and all hoses are securely connected.
- Sätt i ett laddat batteri.
- Move the On/Off/Mode switch to the desired operating mode.
Figure 6: Detail of the On/Off/Mode switch, allowing selection between ECO and BOOST modes.
5.2 Strömlägen
- Eco läge: Provides maximum battery life with reduced pump pressure. Ideal for lighter watering tasks or when extended run time is required.
- BOOST-läge: Delivers maximum pump power and pressure (up to 2.5 bar, 25m head). Suitable for demanding applications or when higher flow rates are needed.
5.3 Stoppa pumpen
To stop the pump, move the On/Off/Mode switch to the "OFF" position. For extended breaks or when finished, remove the battery.
Figure 7: The Einhell AQUINNA 18/28 pump in use, demonstrating its application for garden irrigation from a water source.
6. Underhåll
Regelbundet underhåll säkerställer pumpens livslängd och optimala prestanda.
6.1 Rengöring
- After each use, clean the exterior of the pump with a damp trasa.
- Periodically check the suction filter (if installed) for debris and clean as necessary.
- Ensure no foreign objects enter the pump's inlet or outlet.
6.2 Frostskydd
To prevent damage from freezing temperatures, completely drain the pump before storing it for winter or in cold conditions.
- Ta bort batteriet.
- Koppla bort alla slangar.
- Unscrew the water drain screw located at the bottom of the pump.
- Allow all water to drain completely. Tilt the pump if necessary.
- Replace and tighten the water drain screw.
Figure 8: Close-up of the water drain screw, essential for emptying the pump to prevent frost damage during cold weather.
6.3 Förvaring
Store the pump in a dry, frost-free location, out of reach of children. Ensure the battery is removed before storage.
7. Felsökning
This section addresses common issues you might encounter with your garden pump.
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Pumpen startar inte. | Batteriet är inte isatt eller urladdat. | Sätt i ett laddat batteri. |
| On/Off switch in "OFF" position. | Move switch to "ECO" or "BOOST". | |
| Pumpen går men inget vatten levereras. | Pump not primed (air in housing). | Prime the pump by filling with water (Section 4.3). |
| Suction hose not airtight or too long. | Check all suction connections for leaks. Shorten hose if excessively long. | |
| Suction height too great (over 6m). | Reduce suction height or move pump closer to water source. | |
| Reduced pump performance. | Sugfilter igensatt. | Rengör sugfiltret. |
| Låg batteriladdning. | Ladda eller byt ut batteriet. | |
| Pumpen stannar oväntat. | Överbelastningsskydd aktiverat. | Allow pump to cool down. Check for blockages in hoses or pump. |
8. Tekniska specifikationer
| Särdrag | Specifikation |
|---|---|
| Modell | AQUINNA 18/28 |
| Artikelnummer | 4180440 |
| Voltage | 18 V (Power X-Change) |
| Max. Flödeshastighet | 2800 liter per timme |
| Max. Pump Height (Head) | 25 meter (2.5 bar) |
| Max. Suction Depth | 6 meter |
| Produktmått (L x B x H) | 17.52 x 6.1 x 8.27 cm |
| Objektets vikt | 2.55 kg (5.61 lbs) |
| Material | Metal (connections) |
| Inkluderade komponenter | Battery Garden Pump, Key for Water Fill and Drain Screw |
| Batteri & Laddare | Not included (Power X-Change system) |
9. Garanti och support
Garantiinformation
Einhell products are manufactured to high-quality standards and undergo strict quality controls. The warranty period for this product is typically 2 years from the date of purchase, as per EU regulations for spare part availability. Please retain your proof of purchase for any warranty claims.
The warranty does not cover damage caused by improper use, normal wear and tear, or failure to follow the instructions in this manual.
Kundsupport
For technical assistance, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact details can usually be found in the packaging or on the Einhell corporate webplats.