Dragonhawk Wireless Tattoo Gun Machine YZBTD Instruction Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective operation of your Dragonhawk Wireless Tattoo Gun Machine, Model YZBTD. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. This machine is designed for professional tattoo artists and beginners, offering versatility and reliable performance.

2. Säkerhetsinformation

Always prioritize safety when operating tattoo equipment. Failure to follow these guidelines may result in injury or damage to the device.

• Endast för externt bruk: This device is intended for tattooing on skin.
• Sterilisering: Ensure all needles, cartridges, and contact surfaces are properly sterilized before each use.
• Strömkälla: Använd endast den medföljande laddningskabeln och kompatibla nätadaptrar.
• Batterisäkerhet: Do not expose batteries to extreme temperatures or puncture them. Dispose of used batteries responsibly.
• Hantering: Handle the machine with care. Avoid dropping or subjecting it to strong impacts.
• Fukt: Keep the device dry. It is water-resistant, but not waterproof. Avoid submerging it in liquids.
• Barn: Förvaras utom räckhåll för barn.

3. Produkt överview & Komponenter

The Dragonhawk Wireless Tattoo Gun Machine YZBTD is a cordless pen-style rotary tattoo machine featuring an adjustable stroke length and a powerful coreless motor.

Figur 3.1: Överview of the tattoo machine's control panel and battery.

Nyckelkomponenter:

• Maskinkropp: Main housing containing the motor and drive system.
• Batteripaket: Detachable power source with OLED display and control buttons.
• Justerbart grepp: Rotates to adjust needle depth.
• Slagjusteringsknapp: Allows selection of 7 stroke lengths (2.4mm - 4.2mm).
• Needle Cartridge Slot: Where tattoo needle cartridges are inserted.
• Laddningsport typ C: För att ladda batteriet.

4. Inställning

4.1 Batteriinstallation

The machine comes with two replaceable batteries to ensure continuous operation.

1. Se till att maskinen är avstängd.
2. Gently twist the battery pack counter-clockwise to detach it from the machine body.
3. Align a charged battery pack with the machine body and twist clockwise until securely fastened.

Figure 4.1: The machine is equipped with two replaceable batteries for extended use.

4.2 Needle Cartridge Installation

Use only compatible Dragonhawk cartridge needles for optimal performance.

1. Select the desired needle cartridge.
2. Insert the needle cartridge into the machine's slot, pushing firmly until it clicks into place.
3. To remove, twist the cartridge slightly and pull it out.

Figure 4.2: Proper insertion of a needle cartridge into the machine.

5. Bruksanvisning

Bekanta dig med kontrollpanelen för effektiv drift.

Figure 5.1: Control panel and stroke adjustment.

5.1 Ström på/av

• Tryck och håll ned 'O' (Switch Button) for a few seconds to power the machine on or off.
• The OLED display will show the current voltage och batterinivå.

5.2 Justera volymentage

• Använd '+' (Voltage Increase Key) och '-' (Voltage Reduction Key) buttons to adjust the voltage i steg om 0.1V.
• Den rekommenderade voltage-området är 4V-12V.

5.3 Changing Mode (Liner/Shader)

• Tryck på 'M' (Switch Mode) button to switch between Liner (L) and Shader (S) gears.
• The machine automatically memorizes the voltage settings for each mode.

5.4 Adjusting Stroke Length

The machine offers 7 adjustable stroke lengths from 2.4mm to 4.2mm.

• Rotate the adjustment knob located on the machine body to select the desired stroke length.
• Available lengths: 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm.

Figure 5.2: Adjusting the stroke length by rotating the knob.

5.5 Officiell produktvideo

6. Underhåll

6.1 Rengöring

• Koppla alltid bort strömmen före rengöring.
• Wipe the machine body with a soft, damp trasa och ett milt desinfektionsmedel.
• Do not use abrasive cleaners or submerge the machine in liquid.
• Ensure no liquid enters the motor or charging port.

6.2 Laddning

The machine is equipped with a Type-C charging port.

• Connect the provided Type-C cable to the charging port on the battery pack.
• Connect the other end to a compatible USB power adapter.
• En full laddning tar cirka 1.5 timmar.
• The battery indicator on the OLED display will show charging status.

Figur 6.1: Laddningsport av typ C på batteripaketet.

6.3 Batterivård

• För att förlänga batteriets livslängd, undvik att ladda ur batteriet helt ofta.
• Store the machine and spare batteries in a cool, dry place when not in use.
• If storing for an extended period, charge the batteries to about 50-60% capacity.

7. Felsökning

Se tabellen nedan för vanliga problem och deras lösningar.

8. Specifikationer

Technical details of the Dragonhawk Wireless Tattoo Gun Machine YZBTD.

9. Garanti och support

Dragonhawk is committed to providing high-quality products and excellent customer service.

• Produkttäckning: Dragonhawk products typically include coverage for manufacturing defects. Please refer to your purchase documentation for specific warranty terms.
• Teknisk support: For video tutorials, setup guides, and professional tips, visit Youtube.com/@Dragonhawkofficial.
• Kundservice: For any inquiries or issues with your order, please reach out through Amazon's messaging system.
• Returnerar: This product has a 30-day return policy for refund/replacement.