SPI 31-040-9 Digital gradskiva PRO3600 Användarmanual

1. Introduktion

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

Nyckelfunktioner:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. Produkt överview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. Inställning

3.1 Batteriinstallation

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Locate the battery compartment cover, typically on the underside or side of the unit.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. Stäng batterifacket ordentligt.

3.2 Första start

Efter batteriinstallationen, tryck på PÅ/AV button to power on the device. The LCD display should illuminate and show a reading.

4. Bruksanvisning

4.1 Ström på/av

• För att vrida enheten ON, tryck på PÅ/AV knapp.
• För att vrida enheten AV, tryck på PÅ/AV knappen igen.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. Tryck på ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO knappen igen.

4.3 Holding a Reading

För att frysa den aktuella avläsningen på displayen:

• Tryck på HÅLLA button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the HÅLLA knappen igen.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Mätning av vinklar

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. Underhåll

5.1 Rengöring

• Torka av enheten med en mjuk, torr trasa.
• För envis smuts, en lätt damp en trasa med mild tvål kan användas, följt av omedelbar torkning.
• Använd inte slipande rengöringsmedel, lösningsmedel och doppa inte enheten i vatten.

5.2 Förvaring

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• Om produkten förvaras under längre perioder, ta ur batterierna för att förhindra läckage.

6. Felsökning

• Enheten slås inte på: Kontrollera batteriinstallationen och se till att batterierna inte är urladdade. Byt ut vid behov.
• Felaktiga avläsningar: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Enheten stängs av oväntat: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• Displayen är svag eller flimrande: Batterierna kan vara svaga. Byt ut dem.

7. Specifikationer

8. Garanti och support

8.1 Garantiinformation

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 Kundsupport

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webwebbplatsen eller återförsäljaren som du köpte produkten från.