1. Introduktion
Thank you for choosing the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Säkerhetsinformation
VARNING: Risk för elektrisk stöt. Koppla bort strömmen vid säkringen eller automatsäkringen före installation eller service.
- Installation must be performed by a qualified electrician or person familiar with the construction and operation of the product and the hazards involved.
- Se till att matningen voltage is correct (120V AC).
- Installera inte nära brännbara material.
- Använd skyddsglasögon och handskar under installationen.
- This fixture is designed for outdoor use and is IP65 waterproof rated.
3. Paketets innehåll
Kontrollera att alla komponenter finns innan installationen påbörjas:
- Ljusarmatur (1)
- Monteringsfäste (1)
- Skruvar (olika storlekar)
- Trådmuttrar (3)
- Bruksanvisning (1)
4. Produkt överview
The OREiN Flood Light features three adjustable LED heads and a motion sensor for comprehensive outdoor illumination and security.
Bild 1: Framsidan view of the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light, showing the three adjustable light heads and the motion sensor below.
Figure 2: Diagram illustrating the flexible adjustment angles of the three light heads (340°) and the motion sensor (270° horizontally, 120° vertically).
5. Installation
This flood light is designed for hardwired installation on a standard junction box (2.75” / 3.5”). It supports both wall and eave mounting.
Installationssteg:
- Stäng av strömmen: Disconnect power at the circuit breaker before starting.
- Säkert monteringsfäste: Attach the metal mounting bracket to your existing junction box using the provided screws.
- Anslut kablar: Connect the household wiring to the fixture wires using the provided wire nuts. Typically, black to black (live), white to white (neutral). This light belongs to secondary luminaires, so no extra ground wire connection is needed.
- Säkra belysningsarmaturen: Align the light fixture with the mounting bracket and secure it with the appropriate screws.
- Insert Waterproof Plug: Ensure the waterproof plug is properly inserted to prevent moisture ingress.
- Justera ljushuvuden och sensor: Position the three light heads and the motion sensor to cover the desired areas.
- Återställ ström: Slå på strömmen igen vid strömbrytaren.
Figure 3: Step-by-step diagram for hardwired installation, showing mounting bracket, wire connections, and securing the fixture.
Figur 4: Examples of wall-mounted and soffit-mounted installations for the flood light.
6. Driftlägen
The OREiN Flood Light offers three operational modes, selectable via a switch on the motion sensor unit:
- Övningsläge: The light turns on for 5 seconds when motion is detected, regardless of ambient light. Useful for testing sensor coverage during installation.
- Skymning till gryning (D2D)-läge: The light automatically turns on at night and off during the day. In this mode, the motion sensing function is inactive.
- Auto-läge: The light turns on only at night when motion is detected. The duration the light stays on (1, 5, or 10 minutes) can be adjusted.
Figure 5: Visual representation of Test, Dusk to Dawn, and Auto modes in operation.
Figure 6: Illustration of the Dusk to Dawn mode, showing the light automatically activating when surroundings are dark and deactivating when bright.
7. Justera inställningar
The motion sensor unit includes dials for adjusting the light's duration and sensitivity:
- Time Adjustment (Timer Minutes): Set the duration the light stays on after motion detection in Auto Mode (1, 5, or 10 minutes).
- Sensitivity Adjustment (Sensitivity): Adjust the motion detection range (10ft, 20ft, 30ft, 40ft). Max setting provides up to 40ft detection.
Figure 7: Close-up of the motion sensor with dials for adjusting mode, timer minutes, and sensitivity.
Video 1: Official OREiN video demonstrating the motion sensor outdoor lights, including features like wide detection, adjustable sensing distance, heat dissipation, adjustable time/sensitivity, flexible adjustment, and easy installation.
8. Underhåll
- Rengöring: Rengör fixturen med en mjuk, damp trasa. Använd inte slipande rengöringsmedel eller lösningsmedel.
- Inspektion: Periodically check for any damage to the wiring or housing.
- Byte av glödlampa: The LED bulbs are integrated and not user-replaceable. The fixture has a lifespan of up to 50,000 hours.
Figure 8: Illustration demonstrating the IP65 waterproof rating, showing the light functioning reliably under rain.
Figure 9: Diagram showing the heat dissipation design of the light heads, contributing to the product's longevity.
9. Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Ljuset tänds inte. | No power; incorrect wiring; sensor settings. | Check circuit breaker. Verify wiring connections. Adjust sensor mode/sensitivity. |
| Ljuset lyser kontinuerligt. | Sensor in D2D mode; continuous motion detected; sensitivity too high. | Switch to Auto mode. Check for constant heat sources or movement in detection zone. Reduce sensitivity. |
| Ljuset tänds under dagen. | Sensor in Test mode; ambient light sensor blocked. | Switch to Auto or D2D mode. Ensure the ambient light sensor is not obstructed. |
| Motion detection range is too short/long. | Sensitivity setting incorrect. | Adjust the sensitivity dial on the motion sensor. |
10. Specifikationer
| Särdrag | Detalj |
|---|---|
| Modellnamn | OL3600354 |
| Stämpla | OREiN |
| Ljusstyrka | 4500 XNUMX lumen |
| Wattage | 30 Watt |
| Färgtemperatur | 5000 Kelvin (dagsljus) |
| Voltage | 120 volt |
| Material | Akrylnitril Butadien Styren (ABS) |
| Vattentäthetsnivå | IP65 vattentät |
| Rörelsedetekteringsvinkel | 240° |
| Rörelsedetekteringsavstånd | Upp till 40 fot |
| Justering av ljushuvud | 340° täckning |
| Beräknad livslängd | 50,000 XNUMX timmar |
| Installationstyp | Hardwired (Wall Mount, Eave Mount) |
| Produktens mått | 7.6 cm L x 8 cm B x 6 cm H |
| Objektets vikt | 1.87 pund |
11. Garanti och support
OREiN offers an extended warranty for this product. For specific warranty details, please refer to the product packaging or contact OREiN customer support.
Kundsupport:
- For assistance, contact OREiN directly through Amazon or search for the brand name online.
- If you encounter any issues, it is recommended to contact customer support before initiating a return.
Figure 10: Image representing OREiN customer support, available for assistance.