IXITAB KWS-2301C Multi-Function Digital Display DC Voltage Amperemeter Effektmätare Användarmanual

1. Introduktion

This manual provides instructions for the safe and effective operation of the IXITAB KWS-2301C Multi-Function Digital Display DC Voltage Ammeter Power Meter. This device is designed to measure and display various electrical parameters for Type-C cell phone charging and other DC applications.

2. Säkerhetsinformation

• Se till att ingångsvolymentage and current are within the specified operating range (DC 4-30V, 0-12A).
• Ta inte isär eller modifiera enheten.
• Avoid exposure to extreme temperatures, moisture, or corrosive environments.
• Förvaras utom räckhåll för barn.
• Use only with compatible Type-C devices and power sources.

3. Produkt överview

The KWS-2301C is a compact, multi-functional tester featuring a 0.77-inch OLED HD display and a 12A high-current terminal. It is designed for real-time monitoring of charging voltage, current, power, energy, capacity, and timing.

Bild 3.1: Främre view of the IXITAB KWS-2301C tester, showing its compact design and OLED display.

3.1 Nyckelfunktioner

• 0.77-inch OLED HD Display for clear visibility.
• 12A High Current Terminal for stable performance.
• Metal shell for dustproof and drop-proof durability.
• Full interface compatibility (Type-C).
• Two-way current test function.
• Real-time charging power detection and fast charging test support.

Bild 3.2: The KWS-2301C highlighting its 0.77-inch OLED HD display and 12A high current terminal, ensuring full interface compatibility.

4. Inställning

1. Anslut till strömkälla: Insert the male Type-C connector of the KWS-2301C into a compatible DC power source (e.g., a wall charger, power bank, or computer USB-C port).
2. Anslut enhet: Insert the Type-C charging cable of the device you wish to test (e.g., cell phone, tablet) into the female Type-C port on the KWS-2301C.
3. Ström på: The device will automatically power on and display readings once connected.

5. Bruksanvisning

5.1 Visningslägen

The KWS-2301C features two display orientations for convenient viewing.

Bild 5.1: The KWS-2301C demonstrating its ability to switch between two display orientations for optimal viewing.

5.2 Changing Display Orientation

To change the display orientation, dubbelklicka på knappen located on the side of the device. This will rotate the display content by 180 degrees.

5.3 Tolkning av avläsningar

The OLED display shows multiple parameters simultaneously:

• Voltage (V): Visar aktuell DC-volymtage.
• Aktuell (A): Displays the current DC amperage.
• Effekt (W): Displays the real-time power consumption (Voltagex Aktuell).
• Timing (H): Records the elapsed time of the measurement.
• Kapacitet (mAh): Accumulates the total charge transferred.
• Electrical Energy (Wh): Accumulates the total energy consumed.

6. Underhåll

• Rengöring: Torka av enheten med en mjuk, torr trasa. Använd inte slipande rengöringsmedel eller lösningsmedel.
• Lagring: Förvara enheten på en sval, torr plats, skyddad från direkt solljus och extrema temperaturer.
• Hantering: The metal shell provides durability, but avoid dropping or subjecting the device to severe impacts.

7. Felsökning

7.1 No Display/No Readings

• Ensure the device is properly connected to both the power source and the load.
• Verify that the power source is active and providing voltage within the specified range (DC 4-30V).
• Check for any damage to the Type-C connectors or cables.

7.2 Felaktiga avläsningar

• Se till att alla anslutningar är säkra och fria från skräp.
• Test with a different power source or load to isolate the issue.
• Readings may vary slightly depending on cable quality and device being charged.

8. Specifikationer

Bild 8.1: Dimensional drawing of the KWS-2301C, showing its compact size.

9. Garanti och support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact IXITAB customer service through their official channels. Specific warranty terms may vary by region and retailer.