Viktig säkerhetsinformation
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Följ alltid monteringsanvisningarna noggrant för att förhindra instabilitet eller kollaps.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Överskrid inte den maximala viktkapaciteten på 3500 lbs.
Paketets innehåll
Kontrollera att alla komponenter finns innan monteringen påbörjas.
- Box Spring Frame Components
- Tygskydd
- Installationsmanual
- Skruvar
- Rycka
Installation och montering
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Verktyg som krävs:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Monteringssteg:
- Packa upp komponenter: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Fäll ut ramen: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Säkra anslutningar: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Montera lameller: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Applicera tygöverdrag: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Bruksanvisning
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Placering: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Madrassplacering: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Viktkapacitet: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Brusreducering: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Underhåll och skötsel
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Rengöring av locket: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Rengöring av ram: Torka av metallramen med en torr trasa för att avlägsna damm och skräp. Undvik att använda starka kemikalier eller slipande rengöringsmedel.
- Regelbunden inspektion: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Felsökning
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Pirrande ljud | Lösa anslutningar eller ojämn placering. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Instabilitet/Vacker | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Madrass som hänger | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Specifikationer
| Särdrag | Detalj |
|---|---|
| Stämpla | MAF |
| Modellnummer | MAF-MT33-10K |
| Storlek | Kung |
| Produktens mått | 78.8 cm L x 75.5 cm B x 10 cm H |
| Kompatibel madrassstorlek | 80 cm L x 76 cm B |
| Specialfunktion | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Finish Typ | Pulverlackerad |
| Inkluderade komponenter | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Produktvårdsinstruktioner | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Montering krävs | Ja |
| Avstånd till objekt från marken | 10 tum |
| Objektets vikt | 49.1 pund |
| Maximal viktkapacitet | 3500 lbs |
Figure 5: MAF Box Spring Size Chart.
Garanti och support
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.