1. Introduktion
Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.
2. Säkerhetsinformation
VARNING: RISK FÖR ELEKTRISK STÖT. Koppla ur strömmen vid säkringen eller automatsäkringen före installation eller service.
- Denna produkt måste installeras i enlighet med tillämplig installationskod av en person som är bekant med produktens konstruktion och användning och de risker som är involverade.
- Use only supplied accessories for installation.
- Ensure the balancing mechanism is secure after installation.
- Modifiera eller ändra inte produkten.
- Installera inte nära brandfarliga material.
- This fixture is Class II safety-rated and does not require a ground wire.
3. Paketets innehåll
Kontrollera att alla komponenter finns och är oskadade före installation.
Image: Diagram showing the ALUSSO flood light components and included accessories for installation.
- ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
- Monteringsfäste (1)
- Screws and Wall Anchors (Set)
- Wire Connectors (Yellow Quick-Connects) (Set)
- Waterproof Gasket (1)
- Bruksanvisning (1)
- Garantikort (1)
4. Produkt överview
The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.
Bild: Överview of ALUSSO 30W LED Security Light features.
- Power & Brightness: 30W, 3500 Lumens, covering up to 2000 sq. ft.
- Färgtemperatur (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
- Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
- Rörelsesensor: 150° wide-angle detection with an adjustable range of 1-40 ft.
- Justerbara huvuden: Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
- Varaktighet: IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
- Säkerhet: Class II safety-rated, requiring no ground wire.
5. Installation och installation
This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.
- Stäng av strömmen: Lokalisera strömbrytaren som styr lampan och stäng av strömmen.
- Förbered ledningar: If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
- Installera monteringsfäste: Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
- Anslut kablar: Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
- Fäst fixtur: Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
- Justera ljushuvudena: Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
- Rekommenderad installationshöjd: For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).
Image: Installation steps for the ALUSSO flood light.
Image: Soffit Mounted and Wall Mounted configurations.
6. Bruksanvisning
Your ALUSSO flood light offers adjustable settings for optimal performance.
6.1. Justering av färgtemperatur (CCT)
A dip switch located on the back of the light fixture allows you to select the desired color temperature:
Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).
- WW (varm vit): 3000K
- NW (Natural White): 4000K
- CW (Daylight): 6500K
Note: Adjust the CCT switch before mounting the fixture for easier access.
6.2. Val av driftläge
A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:
Image: Three work modes of the ALUSSO flood light.
- D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
- AUTO Mode (Motion Mode): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
- ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.
6.3. Auto Mode Adjustments
When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:
Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.
- LUX (Brightness Sensitivity): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
- SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
- TID (Varaktighet): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).
Video: Official ALUSSO product video demonstrating features and modes.
7. Underhåll
To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:
- Rengöring: Rengör armaturen regelbundet med en mjuk, damp trasa. Använd inte slipande rengöringsmedel eller lösningsmedel, eftersom de kan skada ytan eller de elektriska komponenterna.
- Inspektion: Kontrollera regelbundet fixturen för tecken på skador, lösa anslutningar eller slitage. Åtgärda eventuella problem omedelbart.
- Sensorrengöring: Håll rörelsesensorns lins ren och fri från hinder (t.ex. smuts, spindel)webs) to ensure accurate detection.
Image: ALUSSO flood light is durable in all weather conditions.
8. Felsökning
Om du upplever problem med din strålkastare kan du se följande vanliga problem och lösningar:
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Ljuset tänds inte. | No power, incorrect wiring, mode setting. | Check circuit breaker. Verify wiring connections. Ensure correct operating mode is selected. |
| Rörelsesensorn detekterar inte. | Incorrect SENS/LUX settings, obstructions. | Adjust SENS to maximum. Adjust LUX towards sun icon. Clear any obstructions from sensor's view. |
| Ljuset lyser kontinuerligt. | TIME setting too long, continuous motion, D2D mode selected. | Adjust TIME to a shorter duration. Ensure no constant motion in detection zone. Switch to AUTO mode if D2D is not desired. |
| Ljusa flimrar. | Loose wiring, unstable power. | Check all wire connections for tightness. Consult an electrician if power supply is unstable. |
9. Specifikationer
| Särdrag | Specifikation |
|---|---|
| Modellnamn | 30W Flood Lights Outdoor Motion Sensor |
| Artikelnummer | WL-YDR-230P |
| Wattage | 30 watt |
| Ljusstyrka | 3500 XNUMX lumen |
| Färgtemperatur | 3000K/4000K/6500K (Justerbar) |
| Voltage | 120 volt (AC) |
| Rörelsedetekteringsvinkel | 150° |
| Räckvidd för rörelsedetektering | 1-40 ft (Adjustable) |
| Light Duration (Auto Mode) | 10 seconds - 10 minutes (Adjustable) |
| Vattentäthetsnivå | IP65 vattentät |
| Användning inomhus/utomhus | Utomhus |
| Installationstyp | Hardwired, Wall Mount/Soffit Mount |
| Produktens mått | 9.45 cm L x 6.9 cm B x 5.12 cm H |
| Objektets vikt | 1.52 pund (0.69 kilo) |
| Genomsnittligt liv | 30000 XNUMX timmar |
| Säkerhetsbetyg | ETL Listed, Class II (no ground wire required) |
10. Garanti och support
ALUSSO provides a 3 års garanti for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.
For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:
- E-post: service-support@alussolighting.com
- Webplats: www.alussolighting.com