JENABOM 3.6V Cordless Electric Screwdriver User Manual

1. Säkerhetsinstruktioner

Läs och förstå alla säkerhetsvarningar och instruktioner innan du använder denna elektriska skruvmejsel. Underlåtenhet att följa dessa instruktioner kan leda till elektrisk stöt, brand och/eller allvarliga skador.

• Säkerhet på arbetsområdet: Håll arbetsytan ren och väl upplyst. Röriga eller mörka områden inbjuder till olyckor. Använd inte elverktyg i explosiva atmosfärer, till exempel i närvaro av brandfarliga vätskor, gaser eller damm.
• Elsäkerhet: Undvik kroppskontakt med jordade ytor såsom rör, element, spisar och kylskåp. Det finns en ökad risk för elstötar om din kropp är jordad. Utsätt inte elverktyg för regn eller våta förhållanden. Vatten som tränger in i ett elverktyg ökar risken för elstötar.
• Personlig säkerhet: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection.
• Verktygsanvändning och vård: Tvinga inte elverktyget. Använd rätt elverktyg för ditt ändamål. Rätt elverktyg gör jobbet bättre och säkrare med den hastighet det är avsett för. Koppla bort batteriet från elverktyget innan du gör några justeringar, byter tillbehör eller förvarar elverktyg.

2. Paketets innehåll

Kontrollera att alla artiklar finns i ditt paket:

• JENABOM 3.6V Cordless Electric Screwdriver
• USB-laddningskabel
• 105-piece Accessory Set (various screwdriver bits, drills, screws, extension rods, magnetizer)
• Förvaringslåda

This image displays the JENABOM 3.6V Cordless Electric Screwdriver, its USB charging cable, and the comprehensive 105-piece accessory kit, including various screwdriver bits, sockets, and a storage case.

The complete JENABOM electric screwdriver kit, including the tool and all 105 accessories, neatly stored in its dedicated carrying case for organization and portability.

3. Produkt överview

Familiarize yourself with the components of your electric screwdriver:

• Hex Collet: Accepts standard 1/4 inch (6.35mm) bits.
• LED-arbetslampa: Lyser upp arbetsområdet.
• Framåt/bakåt-knappar: Controls the rotation direction.
• Charging and Torque Gear Indicator: Displays battery level and selected torque setting.
• USB laddningsport: För laddning av det interna batteriet.
• Halkfritt handtag: Ergonomiskt utformad för bekvämt grepp.

This diagram illustrates the main features of the screwdriver, including the USB charging port, the 1/4 inch hex collet for standard bits, the LED indicator for charge and torque settings, and the forward/reverse control buttons.

4. Inställning

4.1. Charging the Screwdriver

Before first use, fully charge the screwdriver. The built-in 1300mAh lithium-ion battery typically requires 3-5 hours for a full charge.

1. Locate the USB charging port on the screwdriver.
2. Connect the provided USB charging cable to the screwdriver's port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer, power bank, wall adapter).
4. The charging indicator lights will show the charging status. Once fully charged, the indicator will show a full battery.

The image shows the JENABOM electric screwdriver connected to a laptop via its USB cable for charging, demonstrating its convenient and versatile charging options.

4.2. Inserting Screwdriver Bits

The screwdriver features a magnetic hex collet for easy bit changes.

1. Select the appropriate 1/4 inch hex bit for your task.
2. Push the bit firmly into the hex collet until it is securely seated. The magnetic design will hold the bit in place.
3. För att ta bort, dra helt enkelt biten rakt ut.

This image illustrates the magnetic design of the screwdriver's chuck, allowing for quick and easy insertion and removal of screwdriver bits, both directly and with an extension pole.

5. Drift

5.1. Powering On/Off and Direction Control

The screwdriver is activated by pressing and holding the appropriate button.

1. Rotation framåt: Press and hold the forward button (usually indicated by an arrow pointing right or up) for 1 second to start driving screws.
2. Omvänd rotation: Press and hold the reverse button (usually indicated by an arrow pointing left or down) for 1 second to remove screws.
3. Släpp knappen för att stoppa skruvmejseln.

This image illustrates the forward and reverse control buttons on the screwdriver, indicating that a 1-second press is required to initiate operation and switch between modes.

5.2. Vridmomentjustering

The screwdriver features four adjustable torque settings, allowing you to match the power to the task and prevent over-tightening or damage.

1. The torque setting can be adjusted using the dedicated torque adjustment button or by cycling through the settings with the main power button (refer to the indicator lights).
2. Available torque levels range from 2.5 N.m to 5 N.m.
3. Select a lower torque for delicate tasks (e.g., electronics, soft materials) and a higher torque for more demanding applications (e.g., furniture assembly, harder materials).
4. When the set torque is reached, the mechanical clutch will disengage, preventing further tightening.

This graphic provides essential technical data for the screwdriver, detailing its 3.6V operating voltage, 1300mAh battery capacity, 200 RPM no-load speed, and the adjustable torque range from 2.5 N.m to 5 N.m across four settings.

This image demonstrates the functionality of the adjustable 4-level torque system, showing how it prevents damage to screws or materials by disengaging the clutch when the set torque is reached.

5.3. LED arbetsljus

The integrated LED work light automatically activates when the screwdriver is in operation, providing illumination for dark or confined spaces.

An image depicting the screwdriver in operation, with its built-in LED work light actively illuminating the work area, enhancing visibility in low-light conditions.

This image highlights the effectiveness of the LED working light, demonstrating how it provides crucial illumination in dark environments for improved visibility during tasks.

6. Underhåll

Regular maintenance ensures optimal performance and extends the life of your screwdriver.

• Rengöring: Håll verktygets ventilationsöppningar rena för att förhindra överhettning. Använd en mjuk, damp trasa för att rengöra utsidan. Använd inte starka kemikalier eller slipande rengöringsmedel.
• Bitvård: Store screwdriver bits in the provided case to prevent loss and damage. Replace worn or damaged bits to ensure efficient and safe operation.
• Lagring: Store the screwdriver and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.

7. Felsökning

Om du stöter på problem, se följande vanliga problem och lösningar:

8. Specifikationer

Key technical specifications for the JENABOM 3.6V Cordless Electric Screwdriver:

9. Garanti och support

For warranty information or technical support, please contact JENABOM customer service. Details can typically be found on the product packaging or the official JENABOM webplats.

If you are not satisfied with your purchase, please feel free to contact us. JENABOM will reply to you within 24 hours.