ALUSSO Solar Outdoor Motion Sensor Light (Model OT05) Instruction Manual

1. Introduktion

Thank you for choosing the ALUSSO Solar Outdoor Motion Sensor Light, Model OT05. This manual provides detailed instructions for the safe and efficient use of your new solar light. This product is designed to provide adjustable, motion-activated lighting for outdoor areas such as gardens, yards, garages, and porches, utilizing solar power for energy efficiency.

2. Säkerhetsinformation

• Läs alla instruktioner noggrant före installation och användning.
• Do not disassemble, repair, or modify the product. This may cause damage, electric shock, or fire, and will void the warranty.
• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily for optimal charging.
• Keep the product away from fire and high temperatures.
• Do not immerse the product in water. While it is IP54 waterproof, prolonged submersion can cause damage.
• Rengör solpanelen regelbundet för att säkerställa effektiv laddning.
• Use only the provided Type-C charging cable for emergency charging.

3. Paketets innehåll

Kontrollera att alla komponenter finns i paketet:

Image: Contents of the ALUSSO Solar Light package, showing the solar light unit, remote control, user manual, Type-C charging cable, expansion tubes, and screws.

• Solar Light Outdoor x1
• Fjärrkontroll x1
• Användarmanual x1
• Typ-C laddningskabel x1
• Expansionsrör x6
• Skruv x5

4. Produkt överview

The ALUSSO Solar Outdoor Motion Sensor Light features three adjustable light heads, a motion sensor, and a separate solar panel for flexible installation. It offers multiple lighting modes, adjustable color temperature, and dimming capabilities, all controllable via a remote.

Image: Product diagram illustrating the dimensions (10.12in length, 2.56in height, 3.15in width for light heads, 5.51in x 3.27in for solar panel) and the adjustability of the three light heads and the motion sensor.

The light is constructed from durable ABS plastic with an IP54 waterproof rating, ensuring resistance to heat, corrosion, and frost for reliable outdoor performance.

Image: The ALUSSO solar light demonstrating its "All Weather Ready" features, including heat resistance, IP54 waterproof rating, and frost resistance, shown in sunny, rainy, and snowy environments.

5. Installation och installation

The ALUSSO Solar Light can be installed as a single unit or with the solar panel separated from the light body, connected by a cable, to optimize sun exposure for the panel.

5.1 Välja en installationsplats

• Solpanel: Select a location that receives direct sunlight for 6-8 hours daily for optimal charging. Avoid areas shaded by trees, buildings, or other obstructions.
• Ljusenhet: Choose a spot where the light can effectively illuminate the desired area. The motion sensor should have a clear line of sight to the detection zone. Recommended installation height is 2-3 meters (approximately 6.5-10 feet).

5.2 Installationssteg

1. Förbered monteringsytan: Mark the desired drilling points for the light unit and, if separating, for the solar panel.
2. Borra hål: Use an appropriate drill bit to create holes at the marked positions. Insert the expansion tubes into the drilled holes.
3. Montera ljusenheten: Secure the light unit to the wall or eaves using the provided screws. Ensure it is firmly attached.
4. Mount the Solar Panel (if separate): If installing the solar panel separately, mount it in a sunny location using the remaining screws.
5. Anslut solpanelen: If the solar panel is separate, connect its cable to the light unit.
6. Justera ljushuvuden och sensor: Loosen the adjustment screws on the light heads and motion sensor. Position them to cover the desired lighting and detection areas. Tighten the screws once adjusted.

Image: The ALUSSO solar light installed on a house, illustrating its key features: AUTO/D2D/Always ON working modes, 46ft max detection distance, 3000K-6500K changeable color temperature, 10%-100% dimmable brightness, and dual charging methods (Solar & Type-C).

6. Bruksanvisning

6.1 Initial laddning

For first-time use or after prolonged storage, it is recommended to fully charge the light. Place the solar panel in direct sunlight for 8-10 hours. Alternatively, use the provided Type-C cable to charge the unit for approximately 3.5 hours, especially if there is no sunlight for an extended period.

Image: Two charging methods are shown: Solar Charging (8-10 hours) with the solar panel exposed to sunlight, and Type-C Charging (3.5 hours) using a cable connected to a power source, recommended for initial or emergency charging.

6.2 Fjärrkontrollfunktioner

The included remote control allows for easy adjustment of the light's settings without needing to access the unit directly.

Image: A detailed diagram of the remote control, showing buttons for: Turn on/off, TEST mode, Decrease/Increase color temperature (CCT), Decrease/Increase brightness (DIM), D2D mode, AUTO mode, ON TIME mode, 30s/1m/2m auto off timer, Low sensor sensitivity (4m detection), and High sensor sensitivity (9m detection).

• Strömknapp: Slår på eller av ljuset.
• TEST-läge: Activates a test function for the motion sensor.
• CCT +/-: Adjusts the color temperature (3000K Warm White, 4000K Neutral White, 6500K Cool White).
• DIM +/-: Adjusts the brightness level (10% to 100%).
• MODE Buttons (AUTO, D2D, ON TIME): Väljer önskat driftläge.
• Timer Buttons (30S, 1M, 2M): Sets the duration the light stays on after motion detection in AUTO or D2D modes.
• SENS Buttons (L, H): Adjusts motion sensor sensitivity (L for 4m, H for 9m detection distance).

6.3 Ljuslägen

The light offers three distinct operating modes:

1. Auto-läge:

   In dark environments, the light automatically turns on to 100% brightness when motion is detected. It turns off completely after 30 seconds, 1 minute, or 2 minutes (set by remote) if no further motion is detected.

   

   Image: Auto Mode operation, showing the light off at 0% brightness, activating to 100% brightness upon motion detection, and then turning off after a set time (30s/1min/2min) if no motion is detected.

2. Skymning till gryning (D2D)-läge:

   In dark environments, the light stays on at 10% brightness continuously. When motion is detected, it brightens to 100%. After 30 seconds, 1 minute, or 2 minutes (set by remote) of no motion, it returns to 10% brightness.

   

   Image: Dusk to Dawn (D2D) Mode operation, showing the light dim at 10% brightness, activating to 100% brightness upon motion detection, and then returning to 10% brightness after a set time (30s/1min/2min) if no motion is detected.

3. Alltid PÅ-läge:

   The light will stay on for 30 minutes at a constant brightness (adjustable via DIM buttons) in both bright and dark ambient conditions. After 30 minutes, it automatically switches to AUTO mode.

   

   Image: Always ON Mode operation, showing the light staying on for 30 minutes in both bright and dark ambient conditions, then automatically entering AUTO mode.

6.4 Justera färgtemperatur (CCT)

Use the "CCT +" or "CCT -" buttons on the remote control to cycle through the available color temperatures:

• 3000K varmvit: Provides a soft, yellowish light.
• 4000K Neutralvitt: Offers a balanced, natural white light.
• 6500K kallvit: Delivers a bright, bluish-white light.

Image: The ALUSSO solar light displaying its three color temperature options: Warm White (3000K), Neutral White (4000K), and Cool White (6500K), with the remote control indicating CCT adjustment.

6.5 Justera ljusstyrka (dimning)

Use the "DIM +" or "DIM -" buttons on the remote control to adjust the brightness from 10% to 100%.

Image: The ALUSSO solar light showing different brightness levels (10%, 50%, 100%) to illustrate its 10-100% stepless dimmable feature, with the remote control indicating brightness adjustment.

6.6 Rörelsesensor

The integrated motion sensor detects movement within its range and angle. The detection angle is 120 degrees, and the maximum detection distance is 46 feet (approximately 14 meters).

• Use the "SENS L" (Low) button for a detection distance of 4 meters.
• Use the "SENS H" (High) button for a detection distance of 9 meters.

Image: The ALUSSO solar light's motion sensor capabilities are depicted, showing a 120-degree detection angle and a maximum detection distance of 46 feet (approx. 14 meters), with icons representing detection of people, pets, and vehicles.

7. Underhåll

• Rengöring: Torka regelbundet av solpanelen med en mjuk, damp trasa för att avlägsna damm, smuts eller skräp. En ren panel säkerställer maximal laddningseffektivitet.
• Inspektion: Periodically check the light unit and solar panel for any signs of damage or loose connections.
• Batteriomsorg: To prolong battery life, ensure the light receives adequate sunlight for charging. If storing the light for an extended period, fully charge it before storage and recharge every few months.

8. Felsökning

9. Specifikationer

10. Garanti och support

The ALUSSO Solar Outdoor Motion Sensor Light (Model OT05) comes with a 2-year replacement support warranty. For any questions, technical assistance, or warranty claims, please contact ALUSSO customer support. Contact information can typically be found on the product packaging or the official ALUSSO webplats.

ALUSSO strives to provide excellent lighting solutions and customer service. Please retain your purchase receipt for warranty purposes.