TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer

1. Introduktion

The TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73) is designed for precise temperature monitoring in refrigerators, freezers, water baths, heating blocks, and incubators. This device simultaneously displays current, minimum, and maximum temperatures, offering a comprehensive overview of environmental conditions. Its built-in memory stores temperature data, and programmable alarms provide alerts for critical temperature deviations.

Nyckelfunktioner:

• Simultaneous display of current, minimum, and maximum temperatures.
• Built-in memory for tracking temperature conditions over time.
• Precise high and low temperature alarms, adjustable in 1° increments.
• Submersible temperature probe with a 10-ft (3-m) micro-cable.
• Multiple mounting options: hook-and-loop strips, wall-mount slots, or flip-open stand.
• NIST-traceable calibration certificate included.

2. Paketets innehåll

Kontrollera att alla artiklar som listas nedan finns och är i gott skick:

• TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73)
• 1 5-mL Bottle Probe (submersible)
• NIST-spårbart kalibreringscertifikat med data
• Hook-and-loop strips for mounting
• Magnetic strips for mounting
• Ett alkaliskt AAA-batteri

3. Inställning

3.1. Batteriinstallation

1. Leta reda på batterifacket på baksidan av enheten.
2. Ta bort batterifackets lock.
3. Insert the supplied AAA alkaline battery, ensuring correct polarity (+/-).
4. Sätt tillbaka batterifackets lock ordentligt.

3.2. Placering av sond

The bottle probe is designed to buffer rapid temperature changes, providing a more stable and accurate reading of the stored contents. The 10-ft (3-m) micro-cable allows the probe to be placed inside the monitored environment while the main unit remains outside.

• Place the bottle probe inside the refrigerator, freezer, or other environment where temperature monitoring is required. Ensure the probe is positioned to accurately reflect the temperature of the items being stored.
• The micro-cable is thin enough to allow refrigerator or freezer doors to close without damaging the cable or compromising the seal.

Image: A person placing a bottle probe inside a refrigerator, demonstrating proper probe placement.

3.3. Montering av huvudenheten

The main thermometer unit can be mounted in several ways:

• Hook-and-Loop Strips: Attach the adhesive-backed hook-and-loop strips to the back of the unit and a clean, flat surface (e.g., side of a refrigerator, wall).
• Magnetiska remsor: Use the magnetic strips for attachment to metallic surfaces.
• Wall-Mount Slots: Utilize the integrated slots on the back of the unit to hang it on screws or hooks.
• Flip-Open Stand: For benchtop use, extend the integrated stand on the back of the unit.

Image: A hand pressing a button on the TRACEABLE thermometer, which is mounted on the exterior of a refrigerator.

4. Bruksanvisning

4.1. Ström på/av

The unit powers on automatically upon battery installation. There is no dedicated power button. To turn off, remove the battery.

4.2. Reading Temperatures

The large LCD display shows three temperature readings simultaneously:

• Aktuell temperatur: The real-time temperature measured by the probe.
• Minimum Temperature (MIN): Den lägsta temperaturen som registrerats sedan den senaste återställningen.
• Maximum Temperature (MAX): Den högsta temperaturen som registrerats sedan den senaste återställningen.

4.3. Switching Temperature Units (°F/°C)

Tryck på °F/°C button (if available, or a similar labeled button) to toggle between Fahrenheit and Celsius temperature scales.

4.4. Viewing and Clearing Min/Max Memory

The thermometer automatically records the minimum and maximum temperatures reached since the last memory reset. These values are continuously displayed.

• To clear the MIN/MAX memory and begin a new recording cycle, press the RENSA button. The display will show the current temperature for MIN and MAX until new minimum and maximum values are recorded.

4.5. Ställa in larm

The thermometer features programmable high and low temperature alarms. An alarm will sound when the temperature exceeds the high set point or falls below the low set point. The alarm continues to sound even if the temperature returns to the non-alarm range until acknowledged.

1. Tryck på UPPSÄTTNING knappen för att gå in i larminställningsläget.
2. Använd UP och NER arrow buttons to adjust the desired high temperature alarm limit.
3. Trycka UPPSÄTTNING again to confirm the high limit and proceed to set the low temperature alarm limit.
4. Använd UP och NER arrow buttons to adjust the desired low temperature alarm limit.
5. Trycka UPPSÄTTNING a third time to exit alarm setting mode and save the settings.
6. To enable or disable the alarm, press the LARM PÅ / AV button. An alarm icon will typically appear on the display when the alarm is active.
7. To silence a sounding alarm, press any button. The alarm will reactivate if the temperature remains outside the set limits.

5. Underhåll

5.1. Städning

Regular cleaning helps maintain the accuracy and longevity of your thermometer.

• Wipe the main unit and probe with a damp cloth. A mild soap solution can be used if necessary.
• Do not use abrasive cleaners or solvents, as these may damage the plastic casing eller display.
• Ensure the main unit does not get wet, as it is not waterproof. The probe is submersible.

5.2. Batteribyte

When the display becomes dim or the unit stops functioning, it is time to replace the battery. Refer to Section 3.1 for battery installation instructions.

5.3. Sondvård

The bottle probe is designed for durability. Avoid sharp bends or kinks in the cable, which could damage the internal wiring. The probe is freezer safe and can remain in the monitored environment continuously.

6. Felsökning

If your thermometer is not functioning as expected, please refer to the following common issues and solutions:

7. Specifikationer

8. Garanti

This TRACEABLE product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, alteration, or improper operation. If service is required during the warranty period, please contact customer support.

9. Kundsupport

For technical assistance, warranty claims, or general inquiries, please contact TRACEABLE customer support. Refer to the contact information provided with your purchase documentation or visit the official TRACEABLE webwebbplatsen för den senaste supportinformationen.

Onlineresurser:

• Besök SPÅRBAR webplats for product information, FAQs, and additional resources.