1. Introduktion
Thank you for choosing the AVAPOW A37/TJ18 Jump Starter. This device is designed to safely and efficiently jump-start vehicles with dead 12V batteries and serve as a portable power bank for electronic devices. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the product or your vehicle.
2. Säkerhetsinformation
WARNING: Improper use may result in injury or damage to the device or vehicle.
- Anslut alltid den röda clamp till den positiva (+) terminalen och den svarta clamp till minuspolen (-).
- Rör inte den röda och svarta clamps together to avoid short circuits.
- Starta inte ett fordon med hjälp av startkablar om batterinivån är under 20 %.
- Do not attempt to jump-start vehicles with voltages other than 12V.
- Håll enheten borta från barn.
- Utsätt inte enheten för extrema temperaturer, direkt solljus eller vatten.
- If the jump starter becomes excessively hot during use, discontinue operation immediately.
- Säkerställ ordentlig ventilation under användning och laddning.
3. Paketets innehåll
Kontrollera att alla artiklar finns i ditt paket:
- AVAPOW Jump Starter Unit (A37 or TJ18)
- Smart Jumper Clamps
- USB-C laddningskabel
- Förvaringsväska
- Användarmanual (detta dokument)
Image 3.1: Contents of the AVAPOW Jump Starter package, including the main unit, smart jumper clamps, USB-C charging cable, and a protective storage case.
4. Produkt överview
Familiarize yourself with the components and features of your AVAPOW Jump Starter.
Bild 4.1: Sida view illustrating the Force-Start Button, LED Light, EC5 Output Port, USB-C Input/Output (18W Max), USB-A Output, and DC Output.
Image 4.2: The 4-inch smart display provides real-time power monitoring. Indicators include 'IN' (Charging Detected), 'OUT' (Powering External Devices), 'READY' (Activation Start Indicator), 'Force Start Indicator', and 'Fault Detection Indicator'.
Nyckelfunktioner:
- Hög toppström: Up to 4000A (A37) or 3000A (TJ18) for starting 12V vehicles.
- Dual Starter Modes: Normal Mode for low-voltage batteries and Force Start Mode for completely dead batteries.
- Avancerat säkerhetsskydd: 10-layer safety features including short-circuit, reverse polarity, over-current, and over-temperature protection.
- 4-inch Digital Display: Clear LED screen showing battery level, voltage, and operational alerts.
- Versatile Power Hub: USB-C PD 18W input/output, dual USB-A outputs, and a 12V DC output for charging various devices.
- Ultra-Bright Emergency Light: Features Steady, Strobe, and SOS modes for various situations.
5. Inställning
Första laddning:
Before first use, fully charge the AVAPOW Jump Starter. It is recommended to charge the device every 3-6 months to maintain optimal battery health.
- Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger. For fastest charging, use a PD 18W compatible charger.
- The digital display will show 'IN' and the battery level will increase, indicating charging is in progress.
- Charging is complete when the display shows 100%. A full charge typically takes approximately 2.5 hours with an 18W PD charger.
6. Bruksanvisning
6.1. Starthjälp med ett fordon
Se till att starthjälpen är minst 20 % laddad innan du försöker starta ett fordon med starthjälp.
- Anslut Clamps: Plug the smart jumper clamps into the EC5 output port of the jump starter. Ensure a secure connection.
- Anslut till batteri: Anslut den röda (+) clamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp till den negativa polen på fordonets batteri.
- Kontrollera displayen: The jump starter's display should show 'READY' if the connection is correct and the battery voltage is detected. If a fault is detected, the 'Fault Detection Indicator' will illuminate.
- Startfordon: Start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
- Ta bort Clamps: När fordonet startar, ta omedelbart bort smart-kopplingen.ampfrån bilbatteriet och koppla sedan bort dem från startkabeln.
Image 6.1: The AVAPOW Jump Starter connected to a vehicle battery using the smart clamps, ready to initiate a jump start.
Force Start Mode:
If your vehicle's battery is completely dead (0V) and the jump starter does not display 'READY', you may need to use Force Start Mode.
- Anslut smart clamps to the jump starter and then to the vehicle battery terminals as described above.
- Press and hold the 'Force-Start Button' on the jump starter for 3 seconds. The 'Force Start Indicator' will illuminate.
- Starta din bils motor inom 30 sekunder.
- När fordonet startar, ta omedelbart bort smart-kopplingen.amps.
CAUTION: Use Force Start Mode only when necessary, as it bypasses some safety checks. Ensure correct polarity before activating.
6.2. Användning som en bärbar powerbank
The AVAPOW Jump Starter can charge various electronic devices.
- USB-C-utgång: Connect your device to the USB-C port using a compatible cable for fast charging up to 18W.
- USB-A-utgång: Connect your device to either of the USB-A ports for standard charging (e.g., 5V/3A, 9V/2A, 12V/1.5A).
- 12V DC-utgång: Use the 12V DC output port to power 12V accessories (e.g., tire inflators, car vacuums).
6.3. Using the Emergency LED Light
The built-in LED light offers three modes for various emergency situations.
Image 6.2: The AVAPOW Jump Starter's ultra-bright LED light, capable of Steady, Strobe, and SOS modes for emergency illumination.
- Press the LED light button once for Steady mode.
- Tryck igen för Stroboskopläge.
- Tryck en tredje gång för SOS-läge.
- Tryck en fjärde gång för att släcka ljuset.
7. Underhåll
- Laddning: Ladda starthjälpen minst en gång var 3–6:e månad för att förlänga batteriets livslängd, även om den inte används.
- Lagring: Store the device in a cool, dry place, away from direct sunlight and moisture. The recommended storage temperature is between -4°F to 140°F (-20°C to 60°C).
- Rengöring: Använd en mjuk, torr trasa för att rengöra enhetens utsida. Använd inte starka kemikalier eller slipande material.
- Batteriomsorg: Do not disassemble the unit. The internal battery is not user-replaceable.
8. Felsökning
| Problem | Möjlig orsak | Lösning |
|---|---|---|
| Fordonet startar inte. | Jump starter battery too low; clamps not connected properly; vehicle battery completely dead. | Ensure jump starter is sufficiently charged (>20%). Check clamp connections. Try Force Start Mode if battery is completely dead. |
| Jump starter display shows 'Fault'. | Reverse polarity connection; short circuit; over-temperature. | Koppla ur clamps and re-connect with correct polarity. Ensure clamps are not touching. Allow device to cool down if hot. |
| Hjälpstartaren laddar inte. | Charging cable or adapter faulty; port obstruction. | Try a different USB-C cable and wall adapter. Ensure the USB-C port is clean and free of debris. |
| External devices not charging. | Jump starter battery too low; incorrect cable; device not compatible. | Charge the jump starter. Use the correct charging cable for your device. Verify device compatibility with output specifications. |
9. Specifikationer
- Modell: A37, TJ18
- Toppström: Up to 4000A (A37), 3000A (TJ18)
- Start Voltage: 12V
- Motorkompatibilitet: Upp till 8.0 liters bensin-/8.0 liters dieselmotorer
- USB-C-ingång/utgång: PD 18W Max
- USB-A-utgång 1: 5V/3A, 9V/2A, 12V/1.5A
- USB-A-utgång 2: 5V/2.4A
- DC Output: 12V/10A
- Driftstemperatur: -4°F till 140°F (-20°C till 60°C)
- Laddningstid: Approximately 2.5 hours (with 18W PD charger)
- Säkerhetscertifieringar: UL/FC/CE certified
10. Garanti och support
AVAPOW products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your AVAPOW Jump Starter, please refer to the warranty card included in your package or visit the official AVAPOW website. Please have your model number (A37 or TJ18) and purchase information ready when contacting support.