GOOLOO A5 and A3 Jump Starter with Air Compressor Instruction Manual

1. Produkt överview

The GOOLOO A5 and A3 Jump Starter with Air Compressor are versatile 4-in-1 devices designed for automotive emergencies and daily convenience. They combine a powerful jump starter, a high-capacity tire inflator, a robust power bank, and a bright LED light into a single, portable unit. These devices are engineered for reliability and ease of use in various conditions.

2. Säkerhetsinformation

Your GOOLOO Jump Starter is equipped with 10 smart safety protections to ensure safe operation. Always read and understand all safety instructions before use.

• Överladdningsskydd: Förhindrar batteriskador från överladdning.
• Överströmsskydd: Skyddar mot för högt strömflöde.
• Kortslutningsskydd: Stänger av automatiskt vid kortslutning.
• Omvänd polaritetsskydd: Alerts and prevents damage from incorrect clamp förbindelse.
• AI Software Protection: Intelligent software monitors and manages device performance.
• Skydd mot höga och låga temperaturer: Operates safely within a wide temperature range (-4°F to 140°F).
• Gnistsäkert skydd: Utformad för att förhindra gnistor vid anslutning.
• Över-voltage Skydd: Skyddar mot voltage överspänningar.
• Överbelastningsskydd: Förhindrar skador från överbelastning.
• Skydd mot omvänd laddning: Förhindrar att strömmen flyter tillbaka in i starthjälpen.

Allmänna säkerhetsåtgärder:

• Sänk inte ner enheten i vatten.
• Ta inte isär enheten.
• Förvaras utom räckhåll för barn.
• Use only specified accessories and chargers.

3. Paketets innehåll

Se till att alla artiklar finns med vid uppackning:

• GOOLOO A5/A3 Jump Starter Unit
• Smarta bygelkablar
• Luftslang
• Various Nozzle Adapters (for balls, bicycles, etc.)
• USB-C laddningskabel
• Bärväska
• Användarmanual

4. Produktfunktioner

4.1. Jump Starter Function

The GOOLOO A5 delivers up to 4000A peak current, capable of restarting most 12V vehicles (up to all gas / 10.0L diesel engines). The A3 model provides 3000A peak current for up to all gas / 9.0L diesel engines. Both models feature a BOOST function for deeply discharged or near-dead batteries. Operating temperature range is -4°F to 140°F.

Image: The GOOLOO A5 Jump Starter connected to a car battery, demonstrating the jump-starting capability. The unit displays battery status and current readings.

4.2. Tire Inflator Function

Equipped with a high-efficiency motor, the A5 can inflate tires up to 160 PSI, featuring a 25mm cylinder for faster inflation. The A3 inflates up to 150 PSI. It can inflate a 285/70 R17 pickup tire from 30 PSI to 36 PSI in approximately 2 minutes (A5), or a 195/65 R15 sedan tire from 30 PSI to 36 PSI in 30 seconds (A5). Suitable for full-size pickups, light trucks, SUVs, cars, motorcycles, and bicycles, as well as balls and small inflatables.

Image: The GOOLOO A5 Jump Starter connected to a large vehicle tire, actively inflating it. The display shows the PSI reading and battery level.

4.3. Powerbankfunktion

The unit features a 20,000mAh rated capacity. The A5 includes a built-in 45W USB-C output cable for charging devices like phones and tablets. One full charge supports up to 50 engine starts, 50 minutes of continuous inflation, or multiple device top-ups.

Image: The GOOLOO A5 Jump Starter charging a smartphone using its integrated 45W USB-C cable. The device's display is visible.

4.4. LED-ljusfunktion

A 400-lumen LED flashlight provides illumination with multiple modes: steady lighting, strobe, and SOS. The light can operate for up to 99 hours depending on the mode.

Image: The GOOLOO A5 Jump Starter's 400-lumen LED flashlight is shown illuminating a tire in a dark setting, highlighting its utility as a work light or emergency signal.

4.5. Sunlight-Readable Display

The device features a color LED display with a rotating status ring, offering 2000-nit brightness for clear readability even in direct sunlight. It tracks inflation in real-time.

Image: The GOOLOO A5 Jump Starter's display showing a 20,000mAh battery capacity and various usage statistics like engine starts, tire charges, phone charges, and lighting hours.

5. Inställning

5.1. Laddar enheten

Before first use, fully charge your GOOLOO Jump Starter. Connect the provided USB-C charging cable to the device's input port and to a suitable USB power adapter (not included). The display will indicate charging progress. A full charge supports numerous operations.

6. Bruksanvisning

6.1. Starthjälp med ett fordon

1. Se till att starthjälpenheten är tillräckligt laddad.
2. Plug the smart jumper cables into the jump starter's dedicated port.
3. Anslut den röda (+) clamp till fordonets positiva batteripol.
4. Anslut den svarta (-) clamp to the vehicle's negative battery terminal.
5. Check the indicator lights on the smart jumper cables for a correct connection (usually a solid green light). If the battery is extremely low, press the 'BOOST' button on the jumper cable adapter for an extra surge.
6. Starta fordonets motor.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter unit.

Image: The GOOLOO A3 Jump Starter connected to a car battery in an engine bay, illustrating the proper setup for jump-starting a vehicle.

6.2. Inflating Tires

1. Connect the air hose to the jump starter's air output port.
2. Attach the air hose nozzle securely to the tire's valve stem.
3. Turn on the jump starter unit. The display will show the current tire pressure.
4. Use the mode button to select the desired pressure unit (PSI, BAR, KPA).
5. Use the '+' and '-' buttons to set your target tire pressure.
6. Press the start button to begin inflation. The unit will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the jump starter.

Image: The GOOLOO A3 Jump Starter actively inflating a tire, with the digital display showing the current pressure.

6.3. Användning som powerbank

1. Connect your electronic device (smartphone, tablet, etc.) to the USB-A or USB-C output ports on the jump starter using an appropriate charging cable.
2. Enheten börjar laddas automatiskt.

6.4. Använda LED-lampan

1. Press and hold the light button (usually integrated with the power button) for 2-3 seconds to turn on the steady LED light.
2. Press the light button again to cycle through strobe mode.
3. Press the light button a third time for SOS mode.
4. Press the light button a fourth time to turn off the light.

Image: The GOOLOO A3 Jump Starter's LED flashlight is shown illuminating a dark outdoor area, demonstrating its utility for visibility and emergencies.

7. Underhåll

• Håll enheten ren och fri från damm och skräp.
• Förvara enheten på en sval, torr plats, skyddad från direkt solljus och extrema temperaturer.
• Ladda starthjälpen var 3–6:e månad, även om den inte används, för att bibehålla batteriets skick.

8. Felsökning

• Enheten slås inte på: Ensure the device is charged. If fully charged, contact support.
• Fordonet startar inte: Check that jumper cables are correctly connected (red to +, black to -). Ensure the jump starter is fully charged. If the battery is deeply discharged, use the BOOST function.
• Däcket pumpas inte upp: Check that the air hose is securely connected to both the unit and the tire valve. Ensure the target pressure is set correctly.
• Överhettningsskydd aktiverat: If the device becomes too hot during prolonged use (e.g., multiple jump starts or extended inflation), it may enter overheat protection mode. Allow the unit to cool down before resuming operation.

9. Specifikationer

10. Garanti och support

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product's packaging or visit the official GOOLOO webplats.