EvoFox Blaze 2 Wireless

EvoFox Blaze 2 Wireless Gaming Mouse User Manual

Model: Blaze 2 Wireless

Introduktion

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EvoFox Blaze 2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.

EvoFox Blaze 2 Wireless Gaming Mouse

Image: The EvoFox Blaze 2 Wireless Gaming Mouse, showcasindess design.

Paketets innehåll

Kontrollera att alla artiklar finns i paketet:

  • 1 × EvoFox Blaze 2 Tri Mode RGB Programmable Wireless Gaming Mouse
  • 1 × Nano Receiver (for 2.4GHz wireless connectivity)
  • 1 × Type-C Braided Charging Cable with EMI Ring (1.5m)
  • 1 × Användarmanual (detta dokument)
  • 1 × Warranty & Registration Flyer

Inställning

Laddar musen

Before initial use, fully charge the mouse using the provided Type-C braided charging cable. Connect the Type-C end to the mouse and the USB-A end to a powered USB port on your computer or a USB wall adapter.

EvoFox Blaze 2 Mouse Charging

Image: The EvoFox Blaze 2 mouse connected via its Type-C charging cable.

Anslutningslägen

The EvoFox Blaze 2 supports three connectivity modes:

  1. Trådbundet läge: Connect the mouse directly to your computer using the Type-C cable. This mode offers the lowest latency (<1ms) and charges the mouse simultaneously.
  2. 2.4 GHz trådlöst läge:
    • Sätt i nanomottagaren i en ledig USB-port på din dator.
    • Ensure the mouse is switched to 2.4GHz mode (usually indicated by a switch on the bottom of the mouse).
    • The mouse should connect automatically. This mode offers ultra-low latency (<20ms).
  3. Dual Bluetooth Mode (BTx2):
    • Switch the mouse to one of the Bluetooth modes (BT1 or BT2) using the switch on the bottom.
    • On your computer or device, search for Bluetooth devices and select "EvoFox Blaze 2" to pair.
    • You can pair with two different Bluetooth devices and switch between them. This mode offers low latency (<70ms).
EvoFox Blaze 2 Triple Mode Connectivity

Image: Diagram illustrating the three connectivity modes: Wired (Type-C), 2.4GHz Wireless (USB dongle), and Bluetooth (BTx2).

Programvaruinstallation

For full customization of DPI, polling rate, RGB lighting, and button mapping, download and install the dedicated EvoFox Blaze 2 software from the official EvoFox website. The software is required to unlock the mouse's full potential.

Notera: The software detects the mouse only when connected via wired or 2.4GHz USB mode.

Drift

DPI-justering

The EvoFox Blaze 2 features an Instant S205 optical sensor with up to 12,800 DPI. You can cycle through preset DPI levels using the dedicated DPI buttons on the mouse. For fine-tuning and setting up to 6 custom DPI levels, use the comprehensive software.

EvoFox Blaze 2 12800 DPI Sensor

Image: Visual representation of the 12,800 DPI sensor, polling rate, acceleration, FPS, and IPS specifications.

Omröstningsfrekvens

The mouse supports a 1000Hz polling rate, ensuring rapid response times. The polling rate can be adjusted via the software for specific needs.

Programmerbara knappar

The mouse is equipped with 8 programmable buttons, including a dedicated fire button. Use the software to assign custom functions, macros, and key combinations to these buttons for enhanced in-game control and productivity.

EvoFox Blaze 2 Programmable Buttons

Image: Close-up of the EvoFox Blaze 2 mouse highlighting the 8 programmable buttons, including the fire button.

RGB-belysning

The EvoFox Blaze 2 features customizable RGB lighting. Adjust lighting effects, colors, and brightness through the dedicated software to match your setup or mood.

EvoFox Blaze 2 RGB Lighting

Bild: Detaljerad view of the RGB lighting zones on the EvoFox Blaze 2 mouse.

Programvaruanpassning

The comprehensive software allows you to:

  • Customize DPI levels and sensitivity.
  • Adjust polling rate.
  • Program all 8 buttons.
  • Skapa och redigera makron.
  • Anpassa RGB-ljuseffekter.
  • Save multiple user profiledirekt till musens inbyggda minne.
EvoFox Blaze 2 Software Interface

Image: Screenshot of the EvoFox Blaze 2 customization software interface, showing options for button mapping, DPI, and performance settings.

Underhåll

Batterihantering

The EvoFox Blaze 2 is equipped with a 500mAh rechargeable battery. To maximize battery life:

  • Ladda musen när batteriindikatorn visar låg ström.
  • Utilize the smart power-saving features:
    • Inaktivt läge: Activates after 1 minute of no movement.
    • Djupt viloläge: Activates after 10 minutes of inactivity.
  • These timers can be customized through the software.
EvoFox Blaze 2 Power Saving Features

Image: Illustration of the mouse's power-saving modes: Idle Mode and Deep Sleep Mode.

Rengöring

Wipe the mouse with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or internal components.

Felsökning

  • Musen svarar inte:
    • Se till att musen är laddad.
    • Check the connectivity mode switch (Wired, 2.4GHz, BT1, BT2) on the bottom of the mouse.
    • For 2.4GHz mode, ensure the Nano Receiver is securely plugged into a USB port.
    • For Bluetooth mode, ensure the mouse is paired correctly with your device.
    • Försök att ansluta musen i trådbundet läge för att kontrollera att den fungerar.
  • Programvaran detekterar inte musen:
    • The software only detects the mouse when connected via wired or 2.4GHz USB mode. Ensure you are using one of these modes.
    • Starta om programvaran och/eller datorn.
  • Intermittent anslutning:
    • Ensure there are no strong interference sources (e.g., other wireless devices, large metal objects) near the mouse or receiver.
    • For 2.4GHz, try plugging the Nano Receiver into a different USB port, preferably a front-facing one if using a desktop.
    • Se till att musens batteri är tillräckligt laddat.
  • Problem med RGB-belysning:
    • Ensure the software is installed and running, and check RGB settings.
    • Some lighting modes may consume more battery; ensure the mouse is charged.

Specifikationer

SärdragDetalj
ModellBlaze 2 Wireless
AnslutningsmöjligheterWired (Type-C), 2.4GHz Wireless, Dual Bluetooth (BTx2)
SensorInstant S205 Optical Sensor
DPI-intervallUpp till 12,800 DPI (justerbar)
Omröstningsfrekvens1000 Hz
Acceleration25g
FPS7200
IPS120 tum/sek
Knappar8 Programmable Buttons (Huano Switches)
Byt liv20 miljoner klick
Batteri500mAh uppladdningsbar
LaddningsportUSB typ-C
RGB-belysningCustomizable RGB
Mått (LxBxH)12.8 x 7.7 x 4 cm
Vikt84 g
UrsprungslandKina
TillverkareAllied Electronics & Magnetics Pvt. Ltd.
EvoFox Blaze 2 Durable and Ergonomic Build

Bild: Överview of the mouse's durable and ergonomic build, highlighting features like detachable cable, switch life, programmable buttons, and lightweight design.

Garanti och support

Your EvoFox Blaze 2 Wireless Gaming Mouse comes with a warranty. Please refer to the included Warranty & Registration Flyer for detailed information regarding warranty terms, conditions, and registration procedures.

For technical support or service inquiries, please contact EvoFox customer support. Contact details can typically be found on the official EvoFox webwebbplatsen eller i garantidokumentationen.

Tillverkare: Allied Electronics & Magnetics Pvt. Ltd.

Importör/Packer: Allied Electronics & Magnetics Private Limited C-64/4, Okhla Phase - 2, New Delhi - 110020

© 2026 EvoFox. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.