Keyless Entry Manuals & User Guides

Keyless Entry Manuals

Keyless Entry products include a variety of generic and rebranded electronic keypad handles, smart deadbolts, and remote access systems designed for convenient access control. Our directory provides user manuals, installation instructions, and troubleshooting guides for Keyless Entry locks commonly installed on residential and commercial doors.

Learn how to prepare your door, set up striking plates, program access codes, and maintain your device for optimal home security.

• What tools are required to install a Keyless Entry 9902 electronic handle?

  You will typically need a measuring tape, an electric drill, a 2-inch hole boring saw, a Phillips screwdriver, and a 1-inch drill bit.

• What is the standard door thickness required for these keyless locks?

  Most Keyless Entry keypad locks are designed to fit standard doors with a thickness between 35mm and 45mm.

• How do I adjust the deadbolt for the correct backset?

  The latch is usually initially set for 2-3/8 inches (60mm). You can switch it to 2-3/4 inches (70mm) by pulling back the block to extend the tongue, then rotating it down.

• How do I use the installation template?

  Fold the provided paper template at the dotted line and tape it to the interior side of the door, usually at a 36 to 38-inch height, to accurately mark the hole centers for drilling.