Manualer och användarguider för gränssnittsmoduler

tecnint PM-R125 Rfid Lf Interface Module User Manual

28 april 2026

tecnint PM-R125 Rfid Lf Interface Module Specifications Electrical characteristics  Model PM-R125-TTL PM-R125-232 Power supply 5VDC ± 0.25V Power consumption < 1W RF frequency LF RFID BAND 125kHz ± 2kHz Antenna External, inductive Antenna connection Molex 51191-0300 Data port Serial, TTL…

Brand: tecnint

Honeywell EIM4010 Equipment Interface Module Installation Guide

27 april 2026

Honeywell EIM4010 Equipment Interface Module Overview The Honeywell EIM4010 Equipment Interface Module is used to connect HVAC equipment with compatible control systems. It acts as a communication bridge between thermostats and heating/cooling equipment, enabling better system control and monitoring. Specifications…

Märke: Honeywell

Honeywell NION-232B Network Input Output Node interface module Installation Guide

14 april 2026

NION-232-U400 Product Installation Document This document covers the procedures and specifications for installing the above listed unit and when appropriate, information regarding configuration on the monitored device. For more detailed configuration and operation information, refer to Network Installation Manual, Echelon…

Märke: Honeywell

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module User Manual

28 mars 2026

xtralis LT-SEN-IM Li-ION Tamer off Gas Sensor and Interface Module General Scope This document provides specification details on the Li-ion Tamer Sensor MOS designed to assist users in the installation, operation, and maintenance of the system. Important Notes!  This Li-ion…

Märke: xtralis

Honeywell Home EIM4010 Equipment Interface Module Installation Guide

27 mars 2026

EIM4010 Equipment Interface Module Installer Guide Compatibility EIM4010 Equipment Interface Module is compatible with Elite PRO Red link 3.0 thermostats and T10+ thermostats. Follow the thermostat installation instructions to wire to 24 VAC power and start setup. Mounting EIM4010 Use…

Märke: Honeywell Home

FORTIN EVO-ALL 82101 Universal All in One Data Bypass and Interface Module Instruction Manual

15 mars 2026

FORTIN EVO-ALL 82101 Universal All-in-One Data Bypass and Interface Module Product Specifications Compatible with Mitsubishi RVR Outlander Sport USA vehicles from 2011-2026 Firmware Version: 86.[16] Program bypass option available Features: Immobilizer bypass, Lock, Unlock, Arm, Disarm, Trunk (open), Tachometer, Door…

Märke: FORTIN

PDi PD295-002 Set-top Box Interface Module Instruction Manual

13 mars 2026

PDi PD295-002 Set-top Box Interface Module Cautions and warnings MODEL NUMBER: PD295-002 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions…

Märke: PDi

i safe MOBILE MIM1xA01 gränssnittsmodul bruksanvisning

19 december 2025

IS-IM1x.1 GRÄNSSNITTSMODUL FÖR IS940.x/IS945.x MONTERAD I IS-DS940.1 BRUKSANVISNING MIM1xA01 Gränssnittsmodul IS-IM1x.1 | MODELL MIM1xA01 Dokumentnr. 1077MM01REV00 Version: 2025-11-13 i.safe MOBILE GmbH i_Park Tauberfranken 10 97922 Lauda-Koenigshofen Tyskland Tel. +49 9343 60148-0 info@isafe-mobile.com www.isafe-mobile.com (c) 2025 i.safe…

Märke: i safe MOBILE

seca 452 TRU Alpha-gränssnittsmodulens användarhandbok

18 december 2025

seca 452 TRU Alpha Interface Module Configuring the Wi-Fi Connection Make sure that there is no LAN cable connected to the device. Make sure that TCP port 22020 and 443 is enabled for incoming and outgoing connections within your firewall.…

Märke: seca

Installationsguide för FORTIN EVO-ALL elektroniska systemgränssnittsmodul

19 november 2025

REV.: 20250916 Guide # 126041 EVO-ALL Electronic Systems Interface Module STAND ALONE INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. VEHICLE FORD YEARS 12” display 2022-2024 Vehicle functions supported in this diagram (functional if equipped) Immobilizer…

Märke: FORTIN