yangchi Button Switch Instruction Manual

yangchi Button Switch

Produktinformation

Produktnamn: Växla
Batch-/serienummer: Knappomkopplare

Manufacturer & Eu Representative Info

Tillverkare:
Företagsnamn: Guangzhou yangchi auto parts co. LTD
Adress: CN-2 # 1003 min joke Chuang, mining key ji yuan, tai he zhen, baryon district, Guangzhou.
E-post: ouyan99@dingtalk.com
Telefon: 86-13421389711
EU-auktoriserad representant:
Företagsnamn: CET PRODUCT SERVICE LTD
Adress: Osterholzallee 144 , 71636 Ludwigsburg Germany
E-post: info.cetservice@gmail.com
Telefon: Tel: +4971416432236

Information om efterlevnad

eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Tyskland contact@evatmaster.com

OST_EU_20220224000026

Vi agerar endast som EU-representanter för gränsöverskridande säljare och är inte tillverkare/importörer/distributörer av produkten, och är inte heller involverade i tillverkning/import/försäljning av produkten. Därför ansvarar vi inte för någon eftermarknadsservice relaterad till produkten. Vid eventuella problem med produktkvaliteten eller intrång ska tillverkaren/importören/säljaren ensamt hållas ansvarig.

NOTERA: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

Säkerhet och varningar

Viktig säkerhetsinformation

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.\r\n·
Varning: Keep the device and its cord out of reach of children under 3 years old.\r\n· Keep away from children unless supervised by an adult.\r\n·
Do not use this product for purposes other than its intended use.\r\n· Inspect the product before each use; do not use if damaged.\r\n· Follow installation and operation guidelines to avoid injury.\r\n.

Bruksanvisning

How to Replace a Faulty Window Switch:

Steg 1: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screw driver. Lift the faulty switch out of its harness.
Steg 2: If you don’t want to take off the door casing or the door handle, simply slide a flat-head screwdriver under The switch bezel and pry it until it loosens to access the housing.
Steg 3: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes.
Steg 4: Assemble the rockers into the new switch and snap the device into the bezel.